Difference between revisions of "How to boot from MicroSD Card"
From IGEP - ISEE Wiki
Manel Caro (talk | contribs) |
Manel Caro (talk | contribs) |
||
| Line 293: | Line 293: | ||
</pre> | </pre> | ||
Notes: The kernel binary resides inside the directory: $/home/jdoe/linux-omap-2.6/arch/arm/boot/'''zImage''' | Notes: The kernel binary resides inside the directory: $/home/jdoe/linux-omap-2.6/arch/arm/boot/'''zImage''' | ||
| − | < | + | <br> |
Alternatively you can download the kernel binary from this [http://downloads.isee.biz/pub/releases/linux_kernel/v2.6.37-3/zImage-2.6.37-3.bin link] and modules from [http://downloads.isee.biz/pub/releases/linux_kernel/v2.6.37-3/modules-2.6.37-3.tar.gz this]. | Alternatively you can download the kernel binary from this [http://downloads.isee.biz/pub/releases/linux_kernel/v2.6.37-3/zImage-2.6.37-3.bin link] and modules from [http://downloads.isee.biz/pub/releases/linux_kernel/v2.6.37-3/modules-2.6.37-3.tar.gz this]. | ||
Revision as of 16:15, 10 July 2012
Overview
This how to explains how to create a customized microSD card to boot IGEPv2 or IGEP COM MODULE with other software distributions.
That is, you can boot your IGEP Processor Boards with a different distribution than the pre-installed by ISEE (manufacturer).
|
To update your board with the latest version of the pre-installed software you can follow the article: Update the PRE-INSTALLED software image to a current release. |
Contents
Theory
OMAP35xx or DM37xx processors can boot from a microSD. IGEPv2 or IGEP COM MODULE use the microSD card as highest boot priority, it means that the processor try to boot from the microsd card before try to boot from other devices such the OneNand.
There exist some rules to boot from a microSD card.
- The microsd card must be content at latest 2 partitions.
- The first one must be primary partition with the boot flag mark and formated using FAT file system.
- All names used in this partition must be msdos names, it means you cannot use a extended names.
- The processor must load a first program called MLO, this program must reside in the first partition, this program it's also called x-loader.
The processor ONLY load and execute the MLO program and ignore all the rest it's the X-loader(MLO) the program responsible to load the next programs such kernel or uboot if you use this last one approach.
Therefore, we are going to setup a microSD card with these requirements and install a custom software distribution into it.
Prerequisites
- PC with Linux (We use for this how to Ubuntu 11.04)
- MicroSD Card (4 Gbytes - class 4)
- Tools such, fdisk, mkfs.ext3, mkfs.vfat, gparted ...
- ToolChain.
ToolChain
We will use the Ubuntu/Linaro Toolchain in this howto.
You can install it using synaptic package manager.
Preparing the microSD card
Open a terminal window and clear your dmesg using:
sudo dmesg -c
Now insert a new microsd card in your PC and then check your dmesg:
dmesg
You should see something like this:
mmc0: new high speed SDHC card at address 0001 mmcblk0: mmc0:0001 00000 3.79 GiB mmcblk0: unknown partition table
Ensure all in your microsd card it's erased:
$ sudo dd if=/dev/zero of=/dev/mmcblk0 bs=1024 count=1024 [sudo] password for jdoe: 1024+0 records in 1024+0 records out 1048576 bytes (1.0 MB) copied, 0.43556 s, 2.4 MB/s
Install GParted
We will use the gparted program for create the partitions, if you don't have this program installed then you must install it with this command:
sudo apt-get install gparted
GParted and Creation of Partitions
When the install procedure ends you can call the program from your system tools menu or directly using a terminal console.
Create the MSDOS Partition Table
The next step it's create the msdos table partition for it you should click in the "Device" menu and then in the "Create Partition Table" option.
Check the default option it's create a msdos partition table.
After that you can Apply.
Create the BOOT Partition
The Next step it's create the partitions for it you should go to the partition menu and select the "New" option then the application show a window like this:
We will configure the partition as:
- Primary Partition
- Format: FAT32
- Size: 100 MegaBytes
- Label: Boot
- Align to: cylinder
We must "add" the partition and gparted shows a partitions structure like this:
It is recommended to apply changes now or you might get an error later.
Create the ROOTFS Partition
The Next step it's create the root file system partition.
First you should select the unallocated partition area and then you should go to the partition menu and select the "New" option then the application show a window like this:We will configure the rootfs partition as:
- Primary Partition
- Format: EXT4
- Size: All the Rest
- Label: Rootfs
At end we will click on "Add" button.
Apply all Changes
Click on apply button in the main menu after that gparted show a window like this for confirm all operations
We should click on apply button. When the process finish we can see all changes applied
Now we can see all partitions and configurations done in the main gparted window
Select "Boot flag" for the boot partition
Now we must select the boot flag for the first partition for it we use the right mouse button over the boot partition and select "Manage Flags" option
Now we have the microsd prepared for copy the boot files
Boot Partition Structure
We commented in the theory point the OMAP needs only the MLO (x-loader) file for boot, we will start checking this point.
Before you follow the next points you should mount the microsd boot partition in your host pc.
Select the boot partition and mount it in your host.
X-Loader (MLO)
You can follow this other howto about the IGEP-X-loader.
We will compile the sources and get it from our git repository: $/home/jdoe> git clone git://git.isee.biz/pub/scm/igep-x-loader.git $/home/jdoe> cd igep-x-loader $/home/jdoe/igep-x-loader> make igep00x0_config $/home/jdoe/igep-x-loader> make $/home/jdoe/igep-x-loader> contrib/signGP
Alternatively you can download the binary package from here
Copy the x-loader.bin.ift into the boot partition.
Rename the x-loader.bin.ift to MLO
X-Loader Boot
We will eject the boot and rootfs partitions from our Host PC, this step it's a lot important due the Linux must sync all changes before eject the microsd card.
We will insert our microSD card into the IGEP board, connect the serial debug cable and open the serial terminal
Power UP the board.
Configure the IGEP-X-Loader
You can use a file like this:
[kernel] ; Kernel load address, NOT Modify kaddress=0x80008000 ; RAM disk load Address, NOT Modify ;rdaddress=0x84000000 ; Board Serial ID serial.low=00000001 serial.high=00000000 ; Board Revision revision=0003 ; Kernel Image Name kImageName=zImage ; Kernel RAM Disk Image Name ;kRdImageName=initrd.img-2.6.35-1010-linaro-omap MachineID=xxxx Where Machine ID = 2344 for IGEPv2, ID = 2717 for IGEP COM Module, ID = 3203 for IGEP COM PROTON ; Mode can be: kernel (boot linux kernel) or binary (boot u-boot, QNX kernel or other binary ARM executable) Mode=kernel [kparams] ; buddy parameter selects your expansion board ; buddy = igep0022 (IGEPv2 Expansion board) ; buddy = base0010 (IGEP PARIS or IGEP BERLIN Expansion Board) ; buddy.revision = A or B (Selects Expansion board Revision IGEP Paris or IGEP Berlin only, if you dubt select B) ;buddy=igep0022 ;buddy=base0010 ;buddy.revision=B ; Setup the Kernel console params ; console= Configure the kernel console (ttyS2 kernel <= 2.6.35 ttyO2 if kernel >= 2.6.37) ;console=ttyS2,115200n8 console=ttyO2,115200n8 ; Enable early printk ;earlyprintk=serial,ttyS2,115200 ; Setup the Board Memory Configuration mem=430M ;mem=512M ; Setup the Boot Delay boot_delay=0 ; Setup the ARM Processor Speed ;mpurate=800 ; Setup the loglevel ;loglevel=7 ; Enable Kernel Debug Output ;debug=1 ; Fix RTC Variable ;fixrtc=1 ; Configure nocompcache variable nocompcache=1 ; Configure Frame Buffer Configuration ;omapfb.mode=dvi:1280x720MR-16@60 omapfb.mode=dvi:hd720-16@60 ; Configure Video Ram assigned vram=40M ; Configure Video RAM assigned to every frame buffer omapfb.vram=0:12M,1:16M,2:12M ; Configure frame buffer debug output ;omapfb.debug=1 ; Configure DSS Video Debug option ;omapdss.debug=1 ; Configure the Board Ethernet Mac Address smsc911x.mac=0xb2,0xb0,0x14,0xb5,0xcd,0xde ; --- Configure UBI FS boot --- ;ubi.mtd=2 ;root=ubi0:igep0020-rootfs ;rootfstype=ubifs ; --- Configure NFS boot --- ;ip=192.168.2.123:192.168.2.129:192.168.2.1:255.255.255.0::eth0: ;root=/dev/nfs ;nfsroot=192.168.2.129:/srv/nfs/igep_rootfs ; --- Configure MMC boot --- root=/dev/mmcblk0p2 rw rootwait ; Assign Init program ;init=/bin/bash
Create a new file into the boot partition named igep.ini with these content and save the file.
Kernel
You can follow this other howto about how compile and install the Linux Kernel.
We will get from our git repository the kernel sources and build it:
a) Clone the Kernel git repository $/home/jdoe/> git clone git://git.igep.es/pub/scm/linux-omap-2.6.git $/home/jdoe> cd linux-omap-2.6 b) Checkout your desired branch (we used for this howto 2.6.37.y) $/home/jdoe/linux-omap-2.6> git checkout origin/linux-2.6.37.y -b linux-2-6-37.y c) Configure the kernel $/home/jdoe/linux-omap-2.6> make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- igep00x0_defconfig d) Build the kernel and Modules $/home/jdoe/linux-omap-2.6> make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- zImage modules
Notes: The kernel binary resides inside the directory: $/home/jdoe/linux-omap-2.6/arch/arm/boot/zImage
Alternatively you can download the kernel binary from this link and modules from this.
Root File System
In this tutorial we will use the linaro headless image as rootfs but you can use your favorite rootfs also.
|
|
Here there are many articles about how to get many other software distributions. |
Here you've the linaro nano 11.09 available for download from the ISEE server.
Create the Rootfs mount point
Go to /media directory and create one sub-folder called "binary"
$ cd /media $ sudo mkdir binary
Mount the RootFS partition
Mount the rootfs partition using the 'binary' directory
$ media > sudo mount /dev/mmcblkp2 /media/binary
Untar the rootfs package
Copy "linaro-m-headless-tar-20101108-2.tar.gz" file inside the /media directory and untar the file
$ media > sudo tar xvfz linaro-m-headless-tar-20101108-2.tar.gz
Now you should see inside your rootfs partition a similar structure like this.
Install the kernel modules
Now you should install your kernel modules inside your root file system.
$ media > cd /home/jdoe/linux-omap-2.6 $ /home/jdoe/linux-omap-2.6> sudo make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- modules_install INSTALL_MOD_PATH=/media/binary
Install the kernel Image
Just copy the zImage inside your boot partition, remember before that you must mount your mmc boot partition.
$ /home/jdoe/linux-omap-2.6> sudo cp arch/arm/boot/zImage /media/boot/
After that you can unmount the boot & rootfs partitions.
Now we're ready for test our new microsd card
Test your new MicroSD
You can test your new microSD card with a Serial client such as PuTTy. Here is an explanation about how to configure it.
(Note that speed should be configured to 115200 bauds).
If you already have configured it or you are using another Serial client and you have connected the Serial cable to the IGEPv2 board, then you are ready to test your microSD.
Insert the microSD in your IGEPv2 board and power up the board.
