Difference between revisions of "U-Boot Texas Instruments Series"
From IGEP - ISEE Wiki
Manel Caro (talk | contribs) (→Configure U-Boot for IGEPv5 device.) |
Manel Caro (talk | contribs) (→Changelog) |
||
Line 109: | Line 109: | ||
make CROSS_COMPILE=arm-linux-gnueabihf- | make CROSS_COMPILE=arm-linux-gnueabihf- | ||
− | |||
− | |||
− | |||
− | |||
[[Category:U-Boot]] | [[Category:U-Boot]] |
Revision as of 16:17, 8 March 2018
U-boot isee_v2017.03
Clone the u-boot repo
Clone the u-boot repository using git address:
$ git@git.isee.biz:arm-boot/u-boot-arm.git
or
$ https://git.isee.biz/arm-boot/u-boot-arm.git
Checkout u-boot repo
Go to the u-boot-arm directory and checkout the isee_v2017.03 as:
$ cd u-boot-arm
$ git checkout remotes/origin/isee_v2017.03 -b isee_v2017.03
Set the board configuration
Now build the u-boot, first set the configuration with:
IGEP COM AQUILA RB11 (256MB RAM)
$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- am335x_igep0033_defconfig
IGEP COM AQUILA RB30 (512MB RAM) (IGEP0033)
$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- am335x_igep0033_RB30_defconfig
IGEP COM PROTON OMAP3530 (IGEP0032)
$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- igep0032_defconfig
IGEP SMARC AM335x (IGEP0034)
$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- am335x_igep0034_defconfig
IGEP SMARC AM335x (IGEP0034) Lite
$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- am335x_igep0034_lite_defconfig
IGEP COM Module DM3730 (IGEP0030)
$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- igep0030_defconfig
IGEP COM Module DM3730 (IGEP0020)
$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- igep0020_defconfig
Build u-boot
You can build u-boot executing this command:
$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-
What next...
After build u-boot you can use it for boot the board, exist several options for boot, check the Hardware Reference Manual about the options available for your board.
- Boot from MicroSD Card.
- Boot from NAND flash or eMMC.
- Boot from USB.
- Boot from Network.
OMAP5 U-boot 2014.01.y
On this 2014.01.y version, supported IGEP Processor Boards are:
- IGEPv5 (IGEP0050)
Binaries
latest stable u-boot version is: 2014.01-0-omap5 (20140131)
Platform | Sources | SPL binary | U-Boot binaries |
---|---|---|---|
IGEP0050 | 2014.01-0-omap5 (md5sum) | MLO-2014.01-0-omap5.bin (md5sum) | u-boot-2014.01-0-omap5.img (md5sum) |
Build u-boot from sources
Download the sources
Download the latest stable version sources and follow next steps:
wget http://downloads.isee.biz/pub/releases/uboot/v2014.01-0-omap5/u-boot-2014.01-0-omap5.tar.gz tar xzf u-boot-2014.01-0-omap5.tar.gz cd [u-boot version]
Or you can clone the u-boot repository using git address:
$ git@git.isee.biz:arm-boot/u-boot-arm.git
or
$ https://git.isee.biz/arm-boot/u-boot-arm.git
Checkout u-boot repo
Go to the u-boot-arm directory and checkout the isee_v2017.03 as:
$ cd u-boot-arm
$ git checkout origin/u-boot-2014.01.y -b u-boot-2014.01.y.local
Configure U-Boot for IGEPv5 device.
make CROSS_COMPILE=arm-linux-gnueabihf- omap5_igep0050_config
Build MLO and U-boot
Then build the SPL and the u-boot image. The result will be an MLO file and an u-boot.img file in current directory. Execute:
make CROSS_COMPILE=arm-linux-gnueabihf-