Difference between revisions of "U-Boot Texas Instruments Series"

From IGEP - ISEE Wiki

Jump to: navigation, search
(Created page with "==isee_imx_v2017.03_4.9.11_1.0.0_ga== ===Clone the u-boot repo=== Clone the u-boot repository using git address: <code>$ git clone git@git.isee.biz:arm-boot/u-boot-imx.git</c...")
 
Line 1: Line 1:
==isee_imx_v2017.03_4.9.11_1.0.0_ga==
+
==U-boot isee_v2017.03==
 
===Clone the u-boot repo===
 
===Clone the u-boot repo===
 
Clone the u-boot repository using git address:
 
Clone the u-boot repository using git address:
  
<code>$ git clone git@git.isee.biz:arm-boot/u-boot-imx.git</code>
+
<code>$ git@git.isee.biz:arm-boot/u-boot-arm.git</code>
  
 
or
 
or
  
 <code>$ git clone https://git.isee.biz/arm-boot/u-boot-imx.git</code>
+
 <code>$ https://git.isee.biz/arm-boot/u-boot-arm.git</code>
  
 
===Checkout u-boot repo===
 
===Checkout u-boot repo===
Go to the u-boot-imx directory and checkout the version 2015.04.y as:
+
Go to the u-boot-arm directory and checkout the isee_v2017.03 as:
  
<code>$ cd u-boot-imx</code>
+
<code>$ cd u-boot-arm</code>
  
<code>$ git checkout remotes/origin/isee_imx_v2017.03_4.9.11_1.0.0_ga -b isee_imx_v2017.03_4.9.11_1.0.0_ga</code> 
+
<code>$ git checkout remotes/origin/isee_v2017.03 -b isee_v2017.03</code> 
  
 
===Set the board configuration===
 
===Set the board configuration===

Revision as of 15:38, 8 March 2018

U-boot isee_v2017.03

Clone the u-boot repo

Clone the u-boot repository using git address:

$ git@git.isee.biz:arm-boot/u-boot-arm.git

or

 $ https://git.isee.biz/arm-boot/u-boot-arm.git

Checkout u-boot repo

Go to the u-boot-arm directory and checkout the isee_v2017.03 as:

$ cd u-boot-arm

$ git checkout remotes/origin/isee_v2017.03 -b isee_v2017.03 

Set the board configuration

Now build the u-boot, first set the configuration with:

IGEP0046 SMARC Quad:

$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- igep0046_imx6dl_2G_defconfig

IGEP0046 SMARC Dual lite

$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- igep0046_imx6q_2G_defconfig

IGEP0046 SMARC Solo

$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- xxxxx

Build u-boot

You can build u-boot executing this command:

$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-

What next...

After build u-boot you can use it for boot the board, exist several options for boot, check the Hardware Reference Manual about the options available for your board.

  • Boot from MicroSD Card.
  • Boot from NAND flash.
  • Boot from eMMC.
  • Boot from USB.
  • Boot from Network.

U-Boot 2015.04.y [EOL]

Clone the u-boot repo

Clone the u-boot repository using git address:

$ git clone git@git.isee.biz:arm-boot/u-boot-fslc.git

or

 $ git clone https://git.isee.biz/arm-boot/u-boot-fslc.git

Checkout u-boot repo

Go to the u-boot-fscl directory and checkout the version 2015.04.y as:

$ cd u-boot-fscl

$ git checkout remotes/origin/isee-imx-patches-2015.04-next -b isee-imx-patches-2015.04-next.local 

Set the board configuration

Now build the u-boot, first set the configuration with:

IGEP0046 SMARC Quad:

$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- mx6q_igep0046_defconfig

IGEP0046 SMARC Dual lite

$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- mx6dl_igep0046_defconfig

IGEP0046 SMARC Solo

$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- mx6s_igep0046_defconfig

Build u-boot

You can build u-boot executing this command:

$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-

What next...

After build u-boot you can use it for boot the board, exist several options for boot, check the Hardware Reference Manual about the options available for your board.

  • Boot from MicroSD Card.
  • Boot from NAND flash.
  • Boot from eMMC.
  • Boot from USB.
  • Boot from Network.