0
edits
Changes
no edit summary
* IGEP SMARC iMX6
* BASEBOARD COMPATIBLE WITH IGEP SMARC EXPANSION and its power supply* SD-card with Yocto Project Firmware
* Monitor compatible with HDMI
* HDMI/HDMI cable
With all the peripherals attached, plug in the wall adapter (5V DC) and power on your board. You will see a few lights flash.
== Serial debug connection ==
Now you need a Null-Modem DB9 female-female serial cable. Connect the cable between the board and your PC. Open the serial on your PC using your preferred serial communications program (minicom) and configure the port as follows:
115200
8N1
no flow control (either software or hardware)
Open the serial port and the debug shell prompt should appear. root user has "root" value as a password to access to the shell prompt.
A detailed guide on how to connect via serial debug port can be found by following this link: [[Using serial debug port to communicate]]