Difference between revisions of "Prepare a ready to boot firmware"
From IGEP - ISEE Wiki
| Line 6: | Line 6: | ||
# Build your own distribution | # Build your own distribution | ||
| − | # Use | + | # Use IGEP Firmware(ready to boot !) |
| Line 21: | Line 21: | ||
| − | ==='''Use | + | ==='''Use IGEP Firmware<br />'''=== |
If you don't feel in the mood to complete all those tutorials you are lucky because using igep precompiled software can still boot your igep board ! | If you don't feel in the mood to complete all those tutorials you are lucky because using igep precompiled software can still boot your igep board ! | ||
| − | # Get | + | # Get IGEP Firmware set-up of your [[IGEP Firmware set-up|igep board]] |
# [http://labs.isee.biz/index.php/How_to_prepare_a_bootable_MicroSD_Card How to prepare a bootable MicroSD Card] | # [http://labs.isee.biz/index.php/How_to_prepare_a_bootable_MicroSD_Card How to prepare a bootable MicroSD Card] | ||
<span style="color: #339966;">'''Now you are ready to visit your igep board Getting Started page !'''</span> | <span style="color: #339966;">'''Now you are ready to visit your igep board Getting Started page !'''</span> | ||
Revision as of 10:33, 17 October 2018
Do you feel lost? Here you will learn what is the primal procedure to boot an igep board using igep firmware.
The primal procedure is to obtain a bootloader, a kernel, a dtb and a rootfs. There are two ways to archieve this.
- Build your own distribution
- Use IGEP Firmware(ready to boot !)
Build your own distribuition
In order to build your own igep firmware, you need to download the sources of the software you want to build and then compile them. Generally you want to start downloading and compiling u-boot, later you will download and compile kernel and finally you will download a rootfs and install the kernel modules you've already compiled into the rootfs. Finally you need to put in proper way all this software to an SD and boot your igep !
To archieve this You need to complete these guides in the following order:
- U-boot Bootloader
- Linux Kernel
- IGEP Firmware set-up ( Here you will find the rootfs )
- How to prepare a bootable MicroSD Card
Use IGEP Firmware
If you don't feel in the mood to complete all those tutorials you are lucky because using igep precompiled software can still boot your igep board !
- Get IGEP Firmware set-up of your igep board
- How to prepare a bootable MicroSD Card
Now you are ready to visit your igep board Getting Started page !
