Difference between revisions of "IGEP SMARC iMX6"

From IGEP - ISEE Wiki

Jump to: navigation, search
Line 3: Line 3:
 
==[https://www.isee.biz/products/igep-smarc SMARC] module SINGLE/DUAL/QUAD core ARM Cortex-A9 up to 1200 MHz==
 
==[https://www.isee.biz/products/igep-smarc SMARC] module SINGLE/DUAL/QUAD core ARM Cortex-A9 up to 1200 MHz==
 
<div style="padding-left: 210px;">[[File:IGEP_smarc_imx6.jpg|left|417x278px]]</div>
 
<div style="padding-left: 210px;">[[File:IGEP_smarc_imx6.jpg|left|417x278px]]</div>
−
 
  
  
Line 248: Line 247:
  
 
==Firmware==
 
==Firmware==
 +
===Tutorials===
 +
* [[How to prepare a bootable MicroSD Card|How to boot from MicroSD Card]]
 +
* [[How to Flash the System into the NAND/eMMC|Boot from NAND/eMMC flash.]]
 +
* [[The bootloader U-Boot|U-boot Bootloader]]
 +
* [[Linux Kernel 4.9.y|Linux Kernel]]
 +
* [[IGEP firmware Yocto|IGEP Firmware Yocto]]
 +
* [[IGEP Firmware Ubuntu]]
 +
* [[IGEP Firmware Debian]]
 +
 
===Documentation===
 
===Documentation===
 
* [[IMX6 Solo|i.MX 6 Solo]]
 
* [[IMX6 Solo|i.MX 6 Solo]]
Line 259: Line 267:
 
* [[Pre-installed software on IGEP Processor Boards|Pre-installed_software_on_IGEP_Processor_Boards]]
 
* [[Pre-installed software on IGEP Processor Boards|Pre-installed_software_on_IGEP_Processor_Boards]]
 
* [[Update the PRE-INSTALLED software image to a current release|Update_the_PRE-INSTALLED_software_image_to_a_current_release]]
 
* [[Update the PRE-INSTALLED software image to a current release|Update_the_PRE-INSTALLED_software_image_to_a_current_release]]
−
* [[How to prepare a bootable MicroSD Card|How to boot from MicroSD Card]]
 
−
* [[How to Flash the System into the NAND/eMMC|Boot from NAND/eMMC flash.]]
 
−
* [[IGEP firmware Yocto|IGEP Firmware Yocto]]
 
−
* [[IGEP Firmware Ubuntu]]
 
−
* [[IGEP Firmware Debian]]
 
−
* [[The bootloader U-Boot|U-boot Bootloader]]
 
−
* [[Linux Kernel 4.9.y|Linux Kernel]]
 
  
 
===Software===
 
===Software===

Revision as of 10:31, 15 May 2018

SMARC module SINGLE/DUAL/QUAD core ARM Cortex-A9 up to 1200 MHz

IGEP smarc imx6.jpg









This Module processor cover an extremely wide performance range. Based on the ARM Cortex-A9 technology, they enable an efficient development of smart devices in an extremely compact, fanless design with balanced processor and graphics performance.


IGEP SMARC iMX6

Highlight Possible Applications
  • Freescale i.MX6 Cortex-A9 Solo, Dual-Lite, Dual and Quad up to 1.2GHz
  • 1GB DDR3L (2GB Option, Solo=512MB), 4GB eMMC Flash, 1x SD/MMC, 1x SATA (D/Q)
  • Parallel 18/24-bit RGB, 24-bit dual-chann. LVDS, HDMI
  • 1 x 10/100/1000Mbps LAN
  • 2 x CAN, 4 x UART, 5 x I2C, 2 x I2S, 1 x PCIe, 12 x GPIOs, 2 x SPI, 4-LANE Serial Camera Interface
  • Human Machine Interface (HMI)
  • Rear Seat Entertainment Systems
  • In-Freight Entertainment
  • The Internet of Things (IOT)
  • Medical-CT Scanner
  • Digital Signage
  • Point of Sales
  • Display Units
  • General Control Systems
  • Smart Grid
  • HVAC Control System


Technical information

Processor

iMX6 Solo/DualLite/Dual/Quad, by NXP Semiconductors

Up to 4 x ARM Cortex-A9 MPCore

NEON SIMD Coprocessor

Frequency speed up to 1200 MHz (depending on model)

3D/2D Accelerator

Vivante GC2000 or GC880 (depending on model), GC355 and GC320,

providing 2D/3D acceleration with OpenGL-ES2.0 and OpenVG 1.1 support.

Video

Video acceleration: H.264, H.263, MPEG-2 and MPEG-4

Memory

RAM: 512 MB, 1 GB or 2 GB DDR3
eMMC Flash: 4 GB or 8 GB eMMC
SPI Flash (optional)
EEPROM

Ethernet

10/100/1000 Mbps Ethernet PHY Interface

USB

1 x USB 2.0 Host
1 x USB 2.0 OTG

Display

1 x LVDS (4 lanes)
1 x HDMI 1.4a (with audio)
1 x MIPI DSI (2 lanes)

Image Capture Interface

1 x MIPI CSI2 interfaces (4 lanes Dual/Quad version, 2 lanes Solo/DualLite version)

Wireless

WiFi IEEE 802.11 b/g/n (Access Point: Yes)
Bluetooth v4.0 (BLE)

Antenna

1 x Internal WiFi/Bluetooth antenna
1 x U.FL connector for external antenna

Additional Interfaces

3 x UART (4 x No WiFi version)
4 x I2C (3 x Dual/Quad version)
1 x MMC
1 x I2S (2 x No WiFi version)
2 x SPI
2 x PWM
2 x CAN
1 x SDIO
12 x GPIO
1 x JTAG Interface
1 x SATA II (Dual/Quad version)
1 x PCIe v2.0 (1 lane) (Dual/Quad version)

SW Support

Linux

Power Supply

Power from expansion connectors: From 4,7 V to 5,25 V
Digital I/O voltage: 1,8 V

Power Consumption

Typical 1,8 W (depending on software) (Quad version)

Maximum 6 W (depending on software) (Quad version)

Thermal

Commercial temperature: 0 ºC to +60 ºC

Industrial temperature: -40 ºC to +85 ºC

Form Factor

82,00 mm x 50 mm by SMARC Specifications

Humidity

93% relative Humidity at 40 ºC, non-condensing (according to IEC 60068-2-78)

MTBF

> 100000 hours


 Evaluation Baseboard: IGEP SMARC EXPANSION

Revisions

Model Description
IGEP0046 - RA99 (2015)
IGEP0046 - RA (2015)
IGEP0046 - RB (2016)
IGEP0046 - RC (2016)
IGEP0046 - RD (2018)

Variants

Model Variants    
IGEP0046-RD01 IGEP0046-DWU1-4XXX ==> WIFI DUAL-LITE DDR 1GB -FLASH 4GB WITHOUT NOR SPI

IGEP0046-RD02

IGEP0046-DWQ2-8SXX ==> WIFI QUAD DDR 2GB -FLASH 8GB SPI NOR
IGEP0046-RD03 IGEP0046-DWU2-4XXX ==> WIFI DUAL-LITE DDR 2GB -FLASH 4GB WITHOUT NOR SPI
IGEP0046-RD04 IGEP0046-DWQ1-8SXX ==> WIFI QUAD DDR 1GB -FLASH 8GB SPI NOR
IGEP0046-RD05 IGEP0046-DWE2-8SXX ==> WIFI DUAL-PLUS DDR 2GB -FLASH 8GB SPI NOR

IGEP0046-RD06

IGEP0046-DWR2-8SXX ==> WIFI QUAD-PLUS DDR 2GB -FLASH 8GB SPI NOR
IGEP0046-RD07 IGEP0046-DWSH-4XXX ==> WIFI SOLO DDR 512MB -FLASH 4GB WITHOUT NOR SPI
IGEP0046-RD08 IGEP0046-DWD2-8SXX ==> WIFI DUAL DDR2GB -FLASH 8GB SPI NOR
IGEP0046-RD10 IGEP0046-DWU2-4XXX ==> NO WIFI DUAL-LITE DDR 2GB -FLASH 4GB WITHOUT NOR SPI

Firmware

Tutorials

Documentation

Software

Getting started with IGEP SMARC iMX6

Ubuntu/Debian Guides

Yocto Guides

Retrieved from "http://labs.isee.biz/index.php?title=IGEP_SMARC_iMX6&oldid=11879"