Latest revision as of 11:46, 9 March 2018

Overview

This how to explains how to create a microSD card to boot IGEP boards with software distributions ( yocto, Ubuntu, Debian ...).

Theory

OMAP35xx, DM37xx, AM335x, OMAP5, iMX6 processors can boot from a microSD. All IGEP boards use the microSD card as highest boot priority, it means that the processor try to boot from the microsd card before try to boot from other devices such the OneNand, Nand, SSD or eMMC.

Exist some rules to boot from a microSD card.

Texas Instruments Processors

The microsd card must be content at latest 2 partitions.
The first one must be primary partition with the boot flag mark and formated using FAT(16 or 32) file system.
All names used in this partition must be msdos names (applies to OLD OMAP35xx processor).
The processor must load a first program called MLO, this program must reside in the first partition, this program it's also called x-loader or uboot-spl.

The processor when boot ONLY load and execute the MLO program and ignore all the rest it's the X-loader(MLO) the program responsible to load the next programs such kernel or uboot if you use this last one approach.

Freescale-NXP Processors

The microsd card must be content at latest 1 partitions.
The primary partition can be formatted with any filesystem that u-boot can mount.
The Processor will load the u-boot.imx it include the SPL and u-boot.

After load this u-boot.imx, u-boot will be ready for boot the kernel.

Therefore, we are going to setup a microSD card with these requirements and install a custom software distribution into it.

Prerequisites

PC with Linux (We use for this how to Ubuntu 16.04 LTS)
MicroSD Card (4 Gbytes - class 4) or bigger ...
Tools such, fdisk, mkfs.ext3, mkfs.vfat, gparted ...
Cross Toolchain included in Ubuntu 16.04 LTS gcc version 4.9.3 (Ubuntu/Linaro 4.9.3-13ubuntu2).

ToolChain

Read: Ubuntu 16.04 LTS Toolchain

Preparing the microSD card

Open a terminal window and clear your dmesg using:

sudo dmesg -c

Now insert a new microsd card in your PC and then check your dmesg:

dmesg

You should see something like this:

mmc0: new high speed SDHC card at address 0001
mmcblk0: mmc0:0001 00000 3.79 GiB
mmcblk0: unknown partition table

Ensure all in your microsd card it's erased:

$ sudo dd if=/dev/zero of=/dev/mmcblk0 bs=1024 count=1024
[sudo] password for jdoe:
1024+0 records in
1024+0 records out
1048576 bytes (1.0 MB) copied, 0.43556 s, 2.4 MB/s

Install GParted

We will use the gparted program for create the partitions, if you don't have this program installed then you must install it with this command:

sudo apt-get install gparted

GParted and Creation of Partitions

When the install procedure ends you can call the program from your system tools menu or directly using a terminal console.

Create the MSDOS Partition Table

The next step it's create the msdos table partition for it you should click in the "Device" menu and then in the "Create Partition Table" option.

Gparted create msdos table partition.png

Check the default option it's create a msdos partition table.

After that you can Apply.

Create the BOOT Partition - IGEP Texas Instruments Processor based

This Step it's only for OMAP35xx, DM37xx, AM335x, OMAP5432 processor based IGEP boards.

The Next step it's create the partitions for it you should go to the partition menu and select the "New" option then the application show a window like this:

We will configure the partition as:

Primary Partition
Format: FAT32
Size: 100 MegaBytes
Free Space Preceding: 0 MiB
Label: Boot
Align to: cylinder

It is recommended to apply changes now or you might get an error later.

Create the BOOT Partition - IGEP NXP-Freescale Processor based

This Step it's only for iMX6 processor based IGEP boards.

The Next step it's create the partitions for it you should go to the partition menu and select the "New" option then the application show a window like this:

We will configure the partition as:

Primary Partition
Format: FAT32
Free Space Preceding: 8 MiB
Size: 100 MegaBytes
Label: Boot
Align to: cylinder

It is recommended to apply changes now or you might get an error later.

Create the ROOTFS Partition

The Next step it's create the root file system partition.

First you should select the unallocated partition area and then you should go to the partition menu and select the "New" option then the application show a window like this:

We will configure the rootfs partition as:

Primary Partition
Format: EXT4
Size: All the Rest
Label: Rootfs

At end we will click on "Add" button.

or

After all apply all changes

Select "Boot flag" for the boot partition

Now we must select the boot flag for the first partition for it we use the right mouse button over the boot partition and select "Manage Flags" option

Now we have the microsd prepared for copy the boot files

MLO + u-boot IGEP Boards Texas Instruments based boards

After build or download the MLO and u-boot you should follow the next steps:

Copy MLO and u-boot.img to primary boot partition

$ cp MLO u-boot.img /media/user/boot

You can follow this HowTo if you want build the MLO and u-boot

u-boot.imx IGEP Boards based on NXP-Freescale Processors

Copy u-boot.imx using dd before primary partition in raw mode as

sudo dd if=/home/user/u-boot-imx/u-boot.imx of=/dev/sde bs=512 seek=2

Where /dev/sde is your microsd card

You can follow this HowTo if you want build the u-boot.imx

Kernel

You can follow this other howto about how compile and install the Linux Kernel.

Root File System

In this tutorial we will use the linaro headless (soft floating) image as rootfs but you can use your favorite rootfs also.


	Here there are many articles about how to get many other software distributions.

Here you've the linaro nano 11.09 (soft floating) available for download from the ISEE server.

Notes: You must build your programs with the hard floating if your rootfs is build with it.

Notes: IGEPv5 must use Hard floating Rootfs

Create the Rootfs mount point

Go to /media directory and create one sub-folder called "binary"

$ cd /media

$ sudo mkdir binary

Mount the RootFS partition

Mount the rootfs partition using the 'binary' directory

$ media > sudo mount /dev/mmcblkp2 /media/binary

Untar the rootfs package

Copy "linaro-m-headless-tar-20101108-2.tar.gz" file inside the /media directory and untar the file

$ media > sudo tar xvfz linaro-m-headless-tar-20101108-2.tar.gz

Now you should see inside your rootfs partition a similar structure like this.

Install the kernel modules

Now you should install your kernel modules inside your root file system.

$ media > cd /home/jdoe/linux-omap-2.6

$ /home/jdoe/linux-omap-2.6> sudo make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- modules_install INSTALL_MOD_PATH=/media/binary

Alternatively if you downloaded the binary package uncompress it inside the directory /media/binary

Install the kernel Image

Just copy the zImage inside your boot partition, remember before that you must mount your mmc boot partition.

$ /home/jdoe/linux-omap-2.6> sudo cp arch/arm/boot/zImage /media/boot/
if you're using dtb kernel as 3.8.y you must copy the dtb too.
$ /home/jdoe/linuz-omap-2.6> sudo cp arch/arm/boot/dtbs/omap5-igep0050.dtb /media/boot

After that you can unmount the boot & rootfs partitions.

Now we're ready for test our new microsd card

Test your new MicroSD

You can test your new microSD card with a Serial client such as PuTTy. Here is an explanation about how to configure it.

(Note that speed should be configured to 115200 bauds).

If you already have configured it or you are using another Serial client and you have connected the Serial cable to the IGEPv2 board, then you are ready to test your microSD.

Insert the microSD in your IGEPv2 board and power up the board.

Personal tools

Search

Namespaces

Views

Export pages

Actions

Difference between revisions of "How to boot from MicroSD Card"

From IGEP - ISEE Wiki