4,199
edits
Changes
m
Update peripheral Categorize new tutorials
Categorize new tutorials How to manage the kernel modules on Linux
Upgrade ethernet gadget tutorial for new IGEP firmware and VM How do I edit my kernel command line
Finish tutorials below == AUDIO DSP-ARM==
NOTES: Qt, Codeblocks and Eclipse are linked to main page===Included (IGEP GST DSP): ==='''AACHEDEC -> DEC AACHE (OK)'''
Eclipse http://download.wavetlan.com/SVV/Media/HTTP/FAAC-> How to develop under Eclipse (copy manual) (refers at beginning VM and option to install Eclipse(under construction))CONFIGURE REMOTE CONNECTION<br> HE-AAC.aac
Qt gst-> How to develop under Qt (refers at begginin VM and option to install Qt (under construction))<br>launch --gst-debug-level=2 filesrc location=sampleaache.m4a ! TIAuddec1 codecName=aachedec engineName=codecServer ! volume volume=0.25 ! alsasink sync=false
Upgrade ethernet gadget how to outofthebox->ok
How to setup a cross compiler(link qt creator and Eclipse tutorial) ----
igep.ini table<br'''MP3DEC ->DEC MP3 (AUDIO ERRORS)'''
Upgrade <span dir="ltr">- Followed README file from ISEE - IGEP Technology Devices Guides</span>DSP - GST + DMAI Support Package 3.40.00
= How to install Qt Creator (under construction) === Overview ==http://www.stephaniequinn.com/Music/Canon.mp3
This guide can be helpful to install and configure Qt SDK in your Linux Operating system. Qt is a crossgst-launch --platform application framework that is widely used for developing application software with a graphical user interface, and also used for developing nongst-GUI programs such as commanddebug-line tools and consoles for servers. You can get more information [http://qt.nokialevel=2 filesrc location=Canon.com/ here]mp3 ! TIAuddec1 codecName=mp3dec engineName=codecServer ! volume volume=0. 25 ! alsasink sync=false
== Requirements =='''Random fatal bit error'''
*PC with Linux, for example [http://www.ubuntu.com/ Ubuntu] distribution. *[http://www.isee.biz/component/zoo/item/igep'''mp3-yocto-toolcahin-sdk IGEP YOCTO Toolchain SDK] *[http://qt.nokia.com/downloads Qt SDK]<br>plugin doesn't resolve the error'''
== Install Qt SDK (Qt-Creator) ==---
=== Before install ===Download the latest release of Qt SDK: http://qt.nokia.com/downloads. Chose Linux Operating System and 32 or 64 bits installer depends your machine. We recommend to use the Offline Installer because its faster than the other one.'''G711DEC -> DEC PCM uLAW (speech) (NOT TESTED)'''
Maybe you want to install build essential to test programs in your Host computer. Install using the next command:<pre>sudo apt-get install build'''G711ENC -essential </pre>=== Installations steps ===ENC PCM uLAW (speech) (NOT TESTED)'''
You need to make the downloaded file executable in order to run it. You can either do this with your desktop's file manager or, at the command line, type===Not included (IGEP GST DSP): ===<pre>chmod u+x <downloaded_file.run></pre> You should now be able to execute the file as normal. You can do this from the command line by typing: <pre>./<downloaded_file.run> </pre'''ACCLCDEC -> DEC AACLE (NOT TESTED)'''
Now follow this steps to install Qt Creator'''AACLDDEC -> DEC AACLD (NOT TESTED)'''
{| cellspacing="1" cellpadding="1" border="1" width="200"|'''WMA9 -| [[Image:Installqtsdk1.png|250px]] | [[Image:Installqtsdk2.png|250px]] | [[Image:Installqtsdk3.png|250px]]|-| [[Image:Installqtsdk4.png|250px]] | [[Image:Installqtsdk5.png|250px]] | [[Image:Installqtsdk6.png|250px]]|}> DEC WMA9 (COMPILING ISSUES)'''
== Configure Yocto SDK =='''ACCHEENC -> ENC AACHE (NOT TESTED)'''
By default Qt'''AACLDENC -Creator can compile programs for x86 systems and Harmattan platforms. Now, you need to add support for IGEP Platform using Yocto SDK.> ENC AACLD (NOT TESTED)'''
=== Install Yocto SDK ==='''WMA8 -> ENC WMA8 (NOT TESTED)'''
If you don't have Yocto SDK installed use these steps: ''Problems adding codecs into igep-gst-dsp'''
{{#lst:How to setup a cross compiler|install_sdk}} == DM3730==
Yocto SDK uses some environment variables that are not load in Qt-creator by default, It is necessary to add these parameters. '''under contruction'''
Close Qt-Creator and edit the following file: ~/QtSDK/QtCreator/bin/qtcreator.sh. Add the following lines at the begining and save changes: '''does not have an accelerated audio decoder element'''
{| cellspacing="1" cellpadding="1" border="1" width="800"|-| '''''#! /bin/bash''''' '''''source /opt/poky/1.2/environmentCompiled gst-setupplugins-armv7a-vfp-neon-poky-linux-gnueabi''''' ugly using yocto tools
''makeAbsolute() {'' - rpm -igst-plugins-ugly-0.*.rpm
|}- rpm -i libmad0-0.*.rpm
Now, add these variables to SDK you should run qtcreator- rpm -i gst-plugins-ugly-mad-0.sh script to start up Qt-Creator*. rpm
*Go to Tools→ Options... → Build&Run. Select Qt versions flag, add qmake from Yocto SDK=== DM3730:Decode a RA or RM audio file (ERRORS)===
{| cellspacinggst-launch --gst-debug-level="1" cellpadding3 filesrc location="1" border="1" widthsample.ra ! rmdemux ! volume volume="200"|-| [[Image:Qtversionssnapshoot0.png|496px]]|}25 ! alsasink
'''<sup>Click to enlarge image<http:/sup>''' /www.superluminal.com/andalib/ra/listen.ra
'''NOTE: '''Don't worry if Qtgst-creator don't recognize ABIplugins-ugly-rmdemux-0.10.19-r1.armv7a. rpm
*Go to Tools→ Optionslibgstsdp-0.10-0-0.10. → Build&Run36-r3. Select Qt versions flag, add Gpp and Gdb from SDKarmv7a.rpm:libgstsdp-0.10-0 libgstsdp-0.10.so.0
{| cellspacing="1" cellpadding="1" border="1" width="200"libgstrtsp-0.10-0-0.10.36-r3.armv7a.rpm:|libgstrtsp-0.10-0 | [[Image:Toolchainssnapshootlibgstrtsp-0.10.so.png|496px]]|}0
Compiler path0: /opt/poky/100:00.2/sysroots/i686-pokysdk-linux/usr/bin/armv7a-vfp-neon-poky-linux-gnueabi/arm-poky-linux-gnueabi-g++ 084839071 1550 0xa137b0 WARN rmdemux rmdemux.c:1012:gst_rmdemux_chain:<rmdemux0> Bogus looking header, unprintable FOURCC
Debugger0: /opt/poky/100:00.2/sysroots/i686-pokysdk-linux/usr/bin/armv7a-vfp-neon-poky-linux-gnueabi/arm-poky-linux-gnueabi-gdb085052695 1550 0xa137b0 WARN rmdemux rmdemux.c:1012:gst_rmdemux_chain:<rmdemux0> Bogus looking header, unprintable FOURCC
== How to develop with Qt under IGEP Technology 0:00:00.085540976 ==1550 0xa137b0 WARN rmdemux rmdemux.c:1057:gst_rmdemux_chain:<rmdemux0> Unknown object_id .ra4
''(from [[How to develop with Qt under IGEP Technology]])'' 0:00:00.085693564 1550 0xa137b0 WARN rmdemux rmdemux.c:1012:gst_rmdemux_chain:<rmdemux0> Bogus looking header, unprintable FOURCC
{{#lst0:How to develop with Qt under IGEP Technology|overview}}00:00.085815634 1550 0xa137b0 WARN rmdemux rmdemux.c:1012:gst_rmdemux_chain:<rmdemux0> Bogus looking header, unprintable FOURCC
= How to install Eclipse (under construction) 0:00:00.085907187 =1550 0xa137b0 WARN rmdemux rmdemux.c:1057:gst_rmdemux_chain:<rmdemux0> Unknown object_id RaTC
{{Table/IGEP Technology Devices|Tech_FamilyEXTRA_OECONF +={{#lst:Template:Links|IGEPv2_EXPANSION_Tech_Family}}"--disable-examples --disable-experimental --disable-sdl --disable-cdaudio --disable-directfb \|Tech_ID --with-plugins={{#lst:Template:Links|IGEPv2_EXPANSION_Tech_ID}}musicbrainz,wavpack,ivorbis,mpegvideoparse,'''faad2''' --disable-vdpau --disable-apexsink \|Name={{#lst:Template:Links|IGEPv2_EXPANSION_Name}} --disable-orc"|Image={{#lstInstall:Template:Links|IGEPv2_EXPANSION_Image}}|ISEE_MainPage={{#lst:Template:Links|IGEPv2_EXPANSION_ISEE_MainPage}}|ISEE_Hardware={{#lst:Template:Links|IGEPv2_EXPANSION_ISEE_Hardware}}}}
<br> __TOC__
= Overview =faad2-2.7-r2.armv7a.rpmlibfaad2-2.7-r2.armv7a.rpmgst-plugins-bad-faad-0.10.23-r2.armv7a.rpm
This is the '''maybe there are necessary more packages, compare actual gst-bad-recipe and add changes. Necessary add faad2 recipe'''<pre>bitbake faad2 gst-plugins-bad</pre><pre> rpm -i faad2-2.7-r2.armv7a.rpmrpm -i libfaad2-2.7-r2.armv7a.rpmrpm -i gst-plugins-bad-faad-0.10.23-r2.1.armv7a.rpm </3 chapter of IGEPv2 Expansion Tutorial Guide. pre>
In this first chapter, we will learn how to connect some expansion peripheralsgst-launch --gst-debug-level=3 filesrc location=sample. aac ! faad ! volume volume=0.10 ! alsasink
In these tutorials we are going to need the following components : <pre>bitbake gst-ffmpeg</pre>
*[http://www.isee.biz/products/processor-boards/igepv2-board IGEPv2], [http://shop.isee.biz/buy-online/accesories/power-supply-2600ma-ac-6w.html +5V DC power supply], Ethernet cable and a PC with Linux or Windows.<brpre> *Powertrip 4.3" or [http://shop.isee.biz/buy-online/accesories/tftgst-24launch -bits-seiko-7v filesrc location=sample.html Seiko 7"] screen if you need a touch screenwma ! asfdemux ! decodebin ! audioconvert ! volume volume=0. *DB9 connector and USB serial converter to follow serial communication tutorial25 ! alsasink <br> *4 pin connector for CAN Bus with another IGEPv2 and Expansion to follow CAN Bus communication tutorial<br> *SIM card with an antenna to follow Telit modem tutorial<br> *Composite video cable, composite video output peripheral (PAL or NTSC) and a screen to follow TVP5151 tutorial<br/pre>
== Connect IGEPv2 Expansion with IGEPv2 Board =='''Into repositories (base plugins):'''
'''Basic''' http://upload.wikimedia.org/wikipedia/en/0/04/Rayman_2_music_sample.ogg
The IGEPv2 Expansion connects to the IGEPv2 Board through J990, JA41, JA42, JC30 and J960 connectorsgst-launch -v filesrc location=sample. Some IGEPv2 Expansion may include three jumpers, you should remove it because they are designed for test and lab purposesogg ! oggdemux ! vorbisdec ! audioconvert ! volume volume=0. Just take a look on the figure below to mount it:<br> 25 ! alsasink
{| align="center" cellspacing="1" cellpaddingBASE0033 CONNECTOR SUMMARY TABLE="1" border="1" width="200"|-| [[Image:Igepv2expconnectoigepv2.PNG|268px]]<br> | [[Image:Igepv2expconnectoigepv2 2.PNG|268px]]<br>|}
[[Image:IGEP0022 PROTO RA DSC 0142.JPG|right|200px]] IGEPv2 Expansion integrates a LCD backlight driver IGEP Firmware Yocto uses the following Ethernet network configuration (Texas instruments TPS61081IP addresses) and touch screen controller (Texas instruments TSC2046), 4-wire touch screen controller which supports a low-voltage I/O interface which can be directly connected to a SEIKO 7” LCD or to a POWERTIP 4.3” LCD. Use J301 connector for POWERTRIP 4.3" or use J302, J303 and J304 connector for SEIKO 7".<br>
'''Know more'''<br> *eth0 − 192.168.5.1*eth0:0 − assigned via dhcp.
IGEPv2 Expansion integrates LCD backlight driver (TPS61081) and touch screen controller (TSC2046), This Ethernet network configuration is really useful when you work using a 4-wire touch screen controller which supports a low voltage I/O interface from 1Linux operating system like IGEP SDK Virtual Machine.5V Because you use eth0 device to 5.25Vcommunicate easily with your board and eth0:0 device to get Internet acces using dhcp protocol.
== Serial port ==But some scenarios this network configuration is not useful, for example: if you use a non-Linux operating system, connect to two IP private range interfaces is not simple. This How-to can be useful to
'''Basic''' [[Image(Make diagram one:Igepv2expdb9connectorIGEP and Linux defualt communication.PNG|right|200px]] Diagram 2 IGEP and other SO alternative configuration)
IGEPv2 Expansion integrates a DB9 RS232 connector= igep. Plug a DB9 cable. <br> ini parameters =
'''Know more''' The kernel command line syntax is name=value1. These next parameters are supported in igep.ini since IGEP-X_Loader 2.4.0-2:
This peripheral (UART 3) can be used to debug system using === [kernel traces, getting a remote prompt, etc. <br> <br> <br> ] ===
IGEPv2 Expansion integrates a VGA connector, the output VGA signal is equal to HDMI connector. Plug a monitor with VGA input. === [kparams] ===
<br>
'''Know more'''<br>
You can use other programs like [[Labs.isee.biz/index.php/How to setup tvp5151 video decoder#Play|yavta]]
== How to use EEPROM ==
'''Basic'''
The IGEP0022 expansion board provides an AT24C01B serial EEPROM memory which is connected to the OMAP via I2C (register 50).<br>
Use i2c-tools to manage it:
<pre>i2cget <bus> <chip> <register>
i2cset <bus> <chip> <register> <value></pre>
For example, the following writes the value 0x22 to register 0x10 of device 0x50 on i2c bus 2:
<pre>i2cset -f -y 2 0x50 0x10 0x22
i2cget -f -y 2 0x50 0x10</pre>
'''Know more'''
See also: i2dump(8), i2cget(8) and i2cset(8) man page
== How to use CAN bus (under construction) ==
{{#lst:How to use CAN bus|IGEPv2 EXPANSION}} {{Template:Navigation/IGEP Technology Guides/What can I do/Ending}} {{Table/IGEP Technology Devices
|Tech_Family={{#lst:Template:Links|IGEPv2_EXPANSION_Tech_Family}}
|Tech_ID={{#lst:Template:Links|IGEPv2_EXPANSION_Tech_ID}}
|Name={{#lst:Template:Links|IGEPv2_EXPANSION_Name}}
|Image={{#lst:Template:Links|IGEPv2_EXPANSION_Image}}
|ISEE_MainPage={{#lst:Template:Links|IGEPv2_EXPANSION_ISEE_MainPage}}
|ISEE_Hardware={{#lst:Template:Links|IGEPv2_EXPANSION_ISEE_Hardware}}
}}
[[Category:IGEP_Technology_Devices_Guides]]
→DM3730: Decode an AAC audio file (OK)
= TODO: =
'''<sup>Click to enlarge image</supACCLCENC ->ENC AACLE (NOT TESTED)'''
=== Add extra environment variables DM3730: Decode a MP3 file (OK) (ADDED TO REPOSISTORIES)===
- gst-launch filesrc location=sample.mp3 ! mad ! volume volume== Add Gpp, Gdb and Qmake to SDK0. ===25 ! alsasink
'''<sup>Click to enlarge image</sup>Error:'''
= Getting started with IGEPv2 Expansion<br> == DM3730: Decode an AAC audio file (OK)===
= Requirements === DM3730: Decode an WMA audio file (OK)====
= Getting started == DM3730: Decode an OGG audio file (OK)===
== TFT and Touchscreen Configure a static IP using the same private network range ==
'''Basicunder construction'''
{| align="JUSTIFY" cellpadding= VGA monitor "1" border="1" style="width: 900px; height: 240px;"|-| '''Parameter Name''' | '''BasicDescription''' | '''Default value''' | '''Comments'''|-| kaddress | Kernel copy address | =0x80008000 | Hex memory address|-| rdaddress | Ram Disk location address | =0x81600000 | Hex memory address; <br>disabled by default|-| serial.low | Serial number (low part) | =00000001 | Numeric|-| serial.high | Serial number (high part) | =00000000 | Numeric|-| revision | Revision ID {| align="right" cellspacing0003 | Numeric|-| kImageName | Kernel, binary image name | ="1" cellpaddingzImage | Kernel or binary image name|-| kRdImageName | Kernel RAM Disk Image Name | - | Ram Disk image name|-| MachineID | Machine ID (kernel ID) | ;IGEPv2<br>="1" border2344 | ;Module<br>="1" width2717<br>;Proton<br>="363"3203
|-
| [[Image:Igepv2expconnecttovga.jpgMode | Boot Mode |150px]] ;Linux kernel<br>=kernel | ;Other image (like uboot)<br>[[Image:Igepv2expvgaconnector.PNG|200px]binary image]
|}
{| align="JUSTIFY" cellpadding="1" border="1" style="width: 900px; height: 1095px;"|-| '''Parameter Name''' | '''Description''' | '''Default value'''| 'Know more''Comments' ''|-| buddy This output is controled by ADV7125KSTZ140 Integrated Circuit. | Enable/disable expansion board support | ;IGEPv2 Expansion Board support<br>=igep0022 | ;Berlin and Paris Expansion Board support<br> =base0010<br> New York Expansion<br> =ilms0015|-| console | Setup the kernel console parameters | =ttyO2,115200n8 | -|-| earlyprintk | Enable early printk | - | -|-| mem | Setup the Board Memory Configuration | = CAN bus 430M | -|-| boot_delay | Setup the boot delay | =0 | -|-| mpurate | Setup ARM Processor Speed | - | -|-| loglevel | Setup the loglevel | - | -|-| debug | Enable kernel debug output | - | -|-| fixrtc | Fix RTC variable | - | -|-| nocompcache | Configure nocompcache variable | =1 | -'''Basic''' |-| omapfb.mode | Configure frame bugger configuration | =dvi:hd720-16@50 [[Image| ;Other configuration<br>=dvi:Igepv2expcanconnector.PNG1280x720MR-16@60|-| vram | Configure Video RAM assigned to every frame buffer | - |right-|200px]]IGEPv2 Expansion integrates a CAN peripheral-| omapfb. Connect any CAN bus device or network vram | Configure Video RAM assigned to the CAN bus connector (J703)every frame buffer | - | -|-| omapfb.<br> debug | Configure frame buffer debug output | - | -'''Know more''' |-| omapdss.debug This | Configure DSS Video debug output is controled by MICROCHIP MCP2515| - | -|-| smsc911x. J703 is a 3mac0 | Configure Board Ethernet Mac Address | =0xb2,0xb0,0x14,0xb5,0xcd,0xde | For IGEP BERLIN|-| smsc911x.5 mm pitch terminal blocks 4 Positions: mac1 | Configure Board Ethernet Mac Address {| cellspacing="1" cellpadding0xb2,0xb0,0x14,0xb5,0xcd,0xdf | For IGEP BERLIN (only with IGEP PROTON)|-| smsc911x.mac | Configure Board Ethernet Mac Address | ="1" border0xb2,0xb0,0x14,0xb5,0xcd,0xde | For IGEPv2, IGEP PROTON, IGEP PARIS and IGEP BERLIN|-| ubi.mtd | Fot UBI FS boot | - | -|-| root | Configure root directory for MMC, NFS or UBI | ;For mmc memory<br>="1" width/dev/mmcblk0p2 rw rootwait | ;For flash memory<br>="350"/dev/mtdblock2|-| nfsroot | For NFS boot | - | -
|-
| Signal Name rootfstype | Pin #<br> For UBI FS boot | Description- | -
|-
| VDD_CAN ip | J703:1 For NFS boot | Supply Voltage (+5V DC)- | -
|-
| CANL init | J703:2 Assign init program | - | CAN Low-Level Voltage I/O
|-
| GND musb_hdrc.debug | J703:3 USB debug | Ground- | -
|-
| CANH musb_hdrc.use_dma | J703:4 USB over network | CAN High-Level Voltage I/O|} == GSM/GPRS modem == '''Basic''' {| align="right" cellspacing="1" cellpadding="1" border="1" width="200"-
|-
| [[Image:IGEP0022 Modem with antennalibertas.pnglibertas_debug |200px]] Configure libertas debug | [[Image:Igepv2expcardreader.PNG|right- |200px]]-
|-
| GSM-GPRS antenna (highly recommended) board.ei485 | SIM card readerEnable/disable RS485 |} IGEPv2 Expansion integrates a GSM/GPRS modem to make phone calls or to send SMS or to write and read data from it, etc.<br> '''Know more''' Modem chip Telit GE865 is a small GSM/GPRS Ball-Grid-Array BGA module with next main features: *Quad-band EGSM 850 / 900 / 1800 / 1900 MHz *Power consumption (typical values) - Power off: ‹ 62 uA<br> - Idle (registered, power saving): 1.6 mA @ DRX=9 <br> <br> <br> == Composite Video Decoder == '''Basic''' [[Image:Igepv2expvideocompositeconnector.PNG|right|200px]]IGEPv2 Expansion integrates two composite video connectors to decode analog input signal. Plug some peripheral with video composite output.<br> '''Know more''' Analog input is decoded by TVP5151. <br> {{Navigation/IGEP Technology Guides/Getting Started/Ending|Next_Step={{#lst:Template:Links|IGEPv2_EXPANSION_Community_Guides_2}}}} {{Table/IGEP Technology Devices|Tech_Family={{#lst:Template:Links|IGEPv2_EXPANSION_Tech_Family}}|Tech_ID={{#lst:Template:Links|IGEPv2_EXPANSION_Tech_ID}}|Name={{#lst:Template:Links|IGEPv2_EXPANSION_Name}}|Image={{#lst:Template:Links|IGEPv2_EXPANSION_Image}}|ISEE_MainPage={{#lst:Template:Links|IGEPv2_EXPANSION_ISEE_MainPage}}|ISEE_Hardware={{#lst:Template:Links|IGEPv2_EXPANSION_ISEE_Hardware}}}} Enable RS485<br> = What can i do with igepv2 expansion = {{Table/IGEP Technology Devices|Tech_Family={{#lst:Template:Links|IGEPv2_EXPANSION_Tech_Family}}|Tech_ID={{#lst:Template:Links|IGEPv2_EXPANSION_Tech_ID}}|Name={{#lst:Template:Links|IGEPv2_EXPANSION_Name}}|Image={{#lst:Template:Links|IGEPv2_EXPANSION_Image}}|ISEE_MainPage={{#lst:Template:Links|IGEPv2_EXPANSION_ISEE_MainPage}}yes |ISEE_Hardware={{#lst:Template:Links|IGEPv2_EXPANSION_ISEE_Hardware}}}} <br> __TOC__ <br> = Overview = This is the 2/3 chapter of IGEPv2 Expansion Tutorial Guide. We will learn some basic tasks such add support to IGEPv2 Expansion, control some peripherals, etc.<br> = What can I do<br> = == How to use Serial communication (DB9 connector) == '''Basic''' RS232 link for UART 3 (/dev/ttyO2) can be obtained through J502 DB9 connector. You can use PuTTy to get a shell prompt to IGEP: *Power up IGEPv2 *Open PuTTy. *Choose Serial line. If you are running PuTTy on Windows, the Serial line will be like (COM1 or COM2 or COM3, etc.). If you are running PuTTy on Ubuntu, the Serial line will be like (/dev/ttyS0 or /dev/ttyS1 or /dev/ttyS3, etc.). Note that if you are using a USB->Serial converter, the Serial line will be like /dev/ttyUSB0 *Configure Speed to 115200 *Select Serial Connection type *Press on Open button *You will successfully started the console. Disable RS485<br> {| cellspacing="1" cellpadding="1" border="1" width="200"no
|-
| [[Image:IGEPV2EXPCHMDB9board.png|250px]] modem | [[Image:Remoteshellpromptdb9putty.jpg|250px]]|} '''Know more''' [[How to use UARTs|Read this tutorial]] to learn about UARTs. == How to use TFT and Touchscreen == Seiko a Powertip touch screens are not supported by default in IGEPv2. Use the following steps for it: *Log into IGEPv2 (via SSH, [http:Enable//labs.isee.biz/index.php/Getting_started_with_IGEPv2#Log_into_IGEPv2_via_Ethernet_interface as shown in the previous chapter]), and run the following commands:<pre>ssh root@192.168.5.1 mkdir /tmp/tempmount -t jffs2 /dev/mtdblock1 /tmp/temp vi /tmp/temp/igep.ini </pre> *In Seiko screen add the following line:<pre>omapdss.def_disp=lcd-70</pre> *In Powertip screen add the following line:<pre>omapdss.def_disp=lcd-43</pre> *Save changes and reboot your IGEP Device to finish it.<br> == How to use Telit Modem == '''Basic''' Telit disable GPRS modem is not supported by default in IGEPv2. Use the following steps for it: *Log into IGEPv2 (via SSH, [http://labs.isee.biz/index.php/Getting_started_with_IGEPv2#Log_into_IGEPv2_via_Ethernet_interface as shown in the previous chapter]), and run the following commands:<pre>ssh root@192.168.5.1 mkdir /tmp/tempmount -t jffs2 /dev/mtdblock1 /tmp/temp vi /tmp/temp/igep.ini </pre> *Add the following line (press i to insert content): buddy.modem=yes *Save changes (ESC ->| :wq -> Enter) and reboot your IGEP Device *Power up the modem. You can power off using again these commands:<pre>echo 0 > /sys/class/gpio/gpio140/valueecho 1 > /sys/class/gpio/gpio141/valuesleep 1echo 0 > /sys/class/gpio/gpio141/value</pre> *Once the Enable modem is on (led D401, near SIM card reader, is blinking nowIGEPv2 Expansion), you can interact with it via UART 2. You can use Microcom to comunicate with it from the serial debug console:<pre>microcom -s 115200 /dev/ttyO1</pre> *To check the modem status use the command:<br><pre>at</pre> *Answer should be OK.<br> *Now unlock it by inserting your SIM card PIN number. Use the command:<pre>at+cpin=<PIN></pre> no *If you correctly inserted the PIN number, the answer should be OK.| If you fail more than 3 times, your SIM card will lock and you will have to insert PUK number. *Now you are ready to use the GSM/GPS ;Enable modem.<br> === Examples === If you successfully '''followed the the previous instructions''', you are ready to test the GSM/GPRS modem. Here are some examples: You can check the complete list of AT commands at the Official manufacturer [http://telit.com/module/infopool/download.php?id=522 Software User Guide]. ==== Test received signal strength<br> ==== Use the instruction: <pre>at+csq</pre> The answer should be: +CSQ: X,0, where X is the signal strenght. For example 12 is poor and 18 is good. If the answer is +CSQ:99,99 you should check your coverage or use an antenna<br> ==== Making a phone call<br> ==== Use the instruction, replace number_to_call with your number: <pre>atd number_to_call</pre> Press any key to end call '''NOTE:''' If "NO CARRIER" message appears, check your coverage or use an antenna. ==== Sending a SMS<br> ==== First of all, you need to configure the SMS format type. Telit GE865 GSM/GPRS supports PDU format and Text format. We use Text format. Type the following command: <pre>AT+CMGF=1</pre> There are so many ways in this modem to send a message. Here you have a simple example. Use the instruction, replace destination_number with your number: <pre>at+cmgs= destination_number> insert here your text message</pre> When you are ready to send your message use Ctrl+Z to send it. If you want to cancel or restart the message press ESC.<br> '''NOTE:''' If "NO CARRIER" message appears, check your coverage or use an antenna. '''NOTE:''' Don't use special characters in SMS text message like <`´'">.<br> '''Know more'''<br> Here you have the official manuals from the manufacturer's webpage:<br> *[http://telit.com/module/infopool/download.php?id=1666 Telit GE865-QUAD Hardware User Guide]<br> *[http://telit.com/module/infopool/download.php?id=522 Telit Modules Software User Guide]<br> == How to use TVP5151 Video Decoder <br> == '''Basic''' Use the following steps to capture analog video: *Connect a video composite input to J501 connector from (IGEPv2 Expansion (near CAN Bus) *Connect a screen, for example HDMI monitor. *Log into IGEPv2 (via SSH, [http://labs.isee.biz/index.php/Getting_started_with_IGEPv2#Log_into_IGEPv2_via_Ethernet_interface as shown in the previous chapter]), and run the following commands:<pre>ssh root@192.168.5.1 </pre> *Now you have a remote igep terminal<br> *Refresh repositories and accept it.<pre>zypper ref </pre> *Install video4linux2 plugin<pre>zypper in gst-plugins-good-video4linux2</pre> *Load OMAP ISP kernel module<br><pre>modprobe omap3-isp</pre> *Configure ISP, for PAL resulution use 720x576 for NTSC resolution use 720x480:<br><pre>media-ctl -r -l '"tvp5150 2-005c":0->"OMAP3 ISP CCDC":0[1], "OMAP3 ISP CCDC":1->"OMAP3 ISP CCDC output":0[1]'media-ctl -v --set-format '"tvp5150 2-005c":0 [UYVY 720x480]'media-ctl -v --set-format '"OMAP3 ISP CCDC":0 [UYVY 720x480]'media-ctl -v --set-format '"OMAP3 ISP CCDC":1 [UYVY 720x480]' </pre> *Export display<pre>export DISPLAY=:0.0 </pre> *Launch gstreamer<pre>gst-launch-0.10 -v v4l2src device=/dev/video2 queue-size=8 ! video/x-raw-yuv,format=\(fourcc\)UYVY,width=720,height=480 ! ffmpegcolorspace ! autovideosink</pre> *Now you can see in your IGEP screen a result similar like this {| cellspacing="1" cellpadding="1" border="1" width="200"yes
|-
| [[Image:Igepv2expgstreamercapturebuddy.jpgrevision |400px]Enable hardware buddy revision [A or B]| Only for base0010<br>=A | Only for base0010<br>=B
|}