Difference between revisions of "IGEPv5 Ubuntu 12.04.4 release 20140314"

From IGEP - ISEE Wiki

Jump to: navigation, search
 
Line 1: Line 1:
Ubuntu 12.04.4 LTS (Hard Float) is the default IGEPv5 base distribution (it's included in IGEPv5 Full and Lite).  
+
Ubuntu 12.04.4 LTS (Hard Float) is the default IGEPv5 base distribution (it's included in IGEPv5 Full and Lite).
  
Release 20140314  
+
Release 20140314
  
= Overview =
+
=Overview=
 +
This documentation is the software manual for IGEPv5 Ubuntu distribution release 20140314.
  
This documentation is the software manual for IGEPv5 Ubuntu distribution release 20140314.
+
__TOC__
  
__TOC__
+
=Where is the software?=
 +
This release can be downloaded from our main repository located [http://downloads.isee.biz/pub/igepv5_ce/releases/ here].
  
= Where is the software? =
+
=What I need before starting?=
 +
* IGEPv5 (Full Version or Lite)
 +
* Serial Cable Debug (db9)
 +
* MicroSD Card.
  
This release can be downloaded from our main repository located [http://downloads.isee.biz/pub/igepv5_ce/releases/ here].  
+
=Install the Image=
 +
Please follow the instructions from [http://labs.isee.biz/index.php/IGEPv5_Ubuntu_Distro this document] about installation procedure. After Install the image is recommended update and upgrade to get the latest software releases using these command:
  
= What I need before starting?  =
 
 
*IGEPv5 (Full Version or Lite)
 
*Serial Cable Debug (db9)
 
*MicroSD Card.
 
 
= Install the Image  =
 
 
Please follow the instructions from [http://labs.isee.biz/index.php/IGEPv5_Ubuntu_Distro this document] about installation procedure. After Install the image is recommended update and upgrade to get the latest software releases using these command:
 
 
<pre>apt-get update
 
<pre>apt-get update
  
apt-get upgrade</pre>  
+
apt-get upgrade</pre>
= What is Included in this Release? =
+
=What is Included in this Release?=
 
+
==Components==
== Components ==
+
* U-boot v2014.01-0-omap5 (SPL).
 
+
** Boot from MicroSD, eMMC, SATA, Ethernet.
*U-boot v2014.01-0-omap5 (SPL).  
+
** 2 GiB Support
**Boot from MicroSD, eMMC, SATA, Ethernet.  
+
* Kernel 3.8.13.
**2 GiB Support  
+
** LPAE
*Kernel 3.8.13.  
+
** 4 GiB Support
**LPAE  
+
** FS Media: SD card, eMMC, NFS, SATA
**4 GiB Support  
+
** USB Host: Isochronous A/V, HID, MSC
**FS Media: SD card, eMMC, NFS, SATA  
+
** UART, I2C, SPI, Ethernet, SATA
**USB Host: Isochronous A/V, HID, MSC  
+
** DSS (HDMI)
**UART, I2C, SPI, Ethernet, SATA  
+
** ABE (Audio)
**DSS (HDMI)  
+
** Wifi b/g/n + BT 4.0 (WLAN)
**ABE (Audio)  
+
** MPU DVFS, AVS Class 0
**Wifi b/g/n + BT 4.0 (WLAN)  
+
** MPU Thermal Mgmt (via CPU freq)
**MPU DVFS, AVS Class 0  
+
** Thermal Sensors
**MPU Thermal Mgmt (via CPU freq)  
+
** OMAP DRM
**Thermal Sensors  
+
* Ubuntu 12.04.4 LTS Hard float Core (See changelog).
**OMAP DRM  
 
*Ubuntu 12.04.4 LTS Hard float Core (See changelog).
 
 
 
== Changelog  ==
 
 
 
*Install nano editor 2.2.6-1
 
*Edit /etc/apt/sources.list
 
**Added universe and multiverse repositories and ISEE repositories
 
*Edit /etc/hosts
 
**Added localhost
 
**Added localhost.localdomain
 
**Added localhost ipv6
 
*Install net-tools 1.60-24.1ubuntu2
 
*Install netbase 4.47ubuntu1
 
*Install iputils-ping 3:20101006-1ubuntu1
 
*Install dhcpcd 1:3.2.3-9ubuntu1
 
*Edit /etc/network/interfaces
 
**Added auto eth0
 
**Added iface eth0 init dhcp
 
*Install sudo 1.8.3p1-1ubuntu3.4
 
*Install dialog 1.1-20111020-1
 
*Set password letmein to root user
 
*added user igep, igep added to groups: adm, sudo, dialout, audio
 
*Install linux kernel linux-image-3.8.13-0-omap5
 
*Install (abe firmware) abefw-omap4plus
 
*Install (abe asoc firmware pkg) asocfw-omap4plus
 
*Install serial console package igepv5-serial-console
 
*Install wl1271 firmware wl1271-igepv5
 
*Install iw 3.2-1
 
*Install (AESS alsa configuration script) igepv5-setup-audio
 
*Install cpufrequtils (007-2)
 
  
= TODO  =
+
==Changelog==
 +
* Install nano editor 2.2.6-1
 +
* Edit /etc/apt/sources.list
 +
** Added universe and multiverse repositories and ISEE repositories
 +
* Edit /etc/hosts
 +
** Added localhost
 +
** Added localhost.localdomain
 +
** Added localhost ipv6
 +
* Install net-tools 1.60-24.1ubuntu2
 +
* Install netbase 4.47ubuntu1
 +
* Install iputils-ping 3:20101006-1ubuntu1
 +
* Install dhcpcd 1:3.2.3-9ubuntu1
 +
* Edit /etc/network/interfaces
 +
** Added auto eth0
 +
** Added iface eth0 init dhcp
 +
* Install sudo 1.8.3p1-1ubuntu3.4
 +
* Install dialog 1.1-20111020-1
 +
* Set password letmein to root user
 +
* added user igep, igep added to groups: adm, sudo, dialout, audio
 +
* Install linux kernel linux-image-3.8.13-0-omap5
 +
* Install (abe firmware) abefw-omap4plus
 +
* Install (abe asoc firmware pkg) asocfw-omap4plus
 +
* Install serial console package igepv5-serial-console
 +
* Install wl1271 firmware wl1271-igepv5
 +
* Install iw 3.2-1
 +
* Install (AESS alsa configuration script) igepv5-setup-audio
 +
* Install cpufrequtils (007-2)
  
Packages not installed:  
+
=TODO=
 +
Packages not installed:
  
*bzip2  
+
* bzip2
*wget  
+
* wget
*bc  
+
* bc
*rsyslog  
+
* rsyslog
*dosfstools  
+
* dosfstools
*alsa-tools, alsa-base, alsa-utils
+
* alsa-tools, alsa-base, alsa-utils
  
Modules:  
+
Modules:
  
*Multimedia  
+
* Multimedia
**H.264 (encoder &amp; decoder), MPEG2 (decoder), MPEG4 (encoder &amp; decoder) &amp; VC1 decoders  
+
** H.264 (encoder &amp; decoder), MPEG2 (decoder), MPEG4 (encoder &amp; decoder) &amp; VC1 decoders
**Gstreamer plugin for video decode acceleration  
+
** Gstreamer plugin for video decode acceleration
**Gstreamer plugin for KMS display sink  
+
** Gstreamer plugin for KMS display sink
**Gstreamer plugin for Wayland sink  
+
** Gstreamer plugin for Wayland sink
**Gstreamer plugin for X11 sink (DRI2video)  
+
** Gstreamer plugin for X11 sink (DRI2video)
**AAC audio codec (ARM based, open-source)  
+
** AAC audio codec (ARM based, open-source)
*Graphics  
+
* Graphics
**2D graphics acceleration (BLTsville)  
+
** 2D graphics acceleration (BLTsville)
**3D graphics acceleration (OpenGL ES 2.0)  
+
** 3D graphics acceleration (OpenGL ES 2.0)
**Wayland , with Weston compositor  
+
** Wayland , with Weston compositor
**X11 stack (without Window Manager)  
+
** X11 stack (without Window Manager)
*Frameworks  
+
* Frameworks
**BIOS (IPU, SMP-only)  
+
** BIOS (IPU, SMP-only)
**DCE (IPU)  
+
** DCE (IPU)
**IPC 3.x  
+
** IPC 3.x
**OMAPdrm libaries
+
** OMAPdrm libaries
  
[[Category:IGEPv5_Ubuntu_Releases]][[Category:Ubuntu]]
+
[[Category:IGEPv5_Ubuntu_Releases]]
 +
[[Category:Ubuntu]]
 +
[[Category:Software distributions]]

Latest revision as of 10:27, 25 June 2018

Ubuntu 12.04.4 LTS (Hard Float) is the default IGEPv5 base distribution (it's included in IGEPv5 Full and Lite).

Release 20140314

Overview

This documentation is the software manual for IGEPv5 Ubuntu distribution release 20140314.

Where is the software?

This release can be downloaded from our main repository located here.

What I need before starting?

  • IGEPv5 (Full Version or Lite)
  • Serial Cable Debug (db9)
  • MicroSD Card.

Install the Image

Please follow the instructions from this document about installation procedure. After Install the image is recommended update and upgrade to get the latest software releases using these command:

apt-get update

apt-get upgrade

What is Included in this Release?

Components

  • U-boot v2014.01-0-omap5 (SPL).
    • Boot from MicroSD, eMMC, SATA, Ethernet.
    • 2 GiB Support
  • Kernel 3.8.13.
    • LPAE
    • 4 GiB Support
    • FS Media: SD card, eMMC, NFS, SATA
    • USB Host: Isochronous A/V, HID, MSC
    • UART, I2C, SPI, Ethernet, SATA
    • DSS (HDMI)
    • ABE (Audio)
    • Wifi b/g/n + BT 4.0 (WLAN)
    • MPU DVFS, AVS Class 0
    • MPU Thermal Mgmt (via CPU freq)
    • Thermal Sensors
    • OMAP DRM
  • Ubuntu 12.04.4 LTS Hard float Core (See changelog).

Changelog

  • Install nano editor 2.2.6-1
  • Edit /etc/apt/sources.list
    • Added universe and multiverse repositories and ISEE repositories
  • Edit /etc/hosts
    • Added localhost
    • Added localhost.localdomain
    • Added localhost ipv6
  • Install net-tools 1.60-24.1ubuntu2
  • Install netbase 4.47ubuntu1
  • Install iputils-ping 3:20101006-1ubuntu1
  • Install dhcpcd 1:3.2.3-9ubuntu1
  • Edit /etc/network/interfaces
    • Added auto eth0
    • Added iface eth0 init dhcp
  • Install sudo 1.8.3p1-1ubuntu3.4
  • Install dialog 1.1-20111020-1
  • Set password letmein to root user
  • added user igep, igep added to groups: adm, sudo, dialout, audio
  • Install linux kernel linux-image-3.8.13-0-omap5
  • Install (abe firmware) abefw-omap4plus
  • Install (abe asoc firmware pkg) asocfw-omap4plus
  • Install serial console package igepv5-serial-console
  • Install wl1271 firmware wl1271-igepv5
  • Install iw 3.2-1
  • Install (AESS alsa configuration script) igepv5-setup-audio
  • Install cpufrequtils (007-2)

TODO

Packages not installed:

  • bzip2
  • wget
  • bc
  • rsyslog
  • dosfstools
  • alsa-tools, alsa-base, alsa-utils

Modules:

  • Multimedia
    • H.264 (encoder & decoder), MPEG2 (decoder), MPEG4 (encoder & decoder) & VC1 decoders
    • Gstreamer plugin for video decode acceleration
    • Gstreamer plugin for KMS display sink
    • Gstreamer plugin for Wayland sink
    • Gstreamer plugin for X11 sink (DRI2video)
    • AAC audio codec (ARM based, open-source)
  • Graphics
    • 2D graphics acceleration (BLTsville)
    • 3D graphics acceleration (OpenGL ES 2.0)
    • Wayland , with Weston compositor
    • X11 stack (without Window Manager)
  • Frameworks
    • BIOS (IPU, SMP-only)
    • DCE (IPU)
    • IPC 3.x
    • OMAPdrm libaries