View source for Update the PRE-INSTALLED software image to a current release

{{Message/Information Message|title=|message='''IMPORTANT NOTE''': This software is distributed in the hope that it will be useful, but '''WITHOUT ANY WARRANTY''';
without even the implied warranty of '''MERCHANTABILITY''' or '''FITNESS FOR A PARTICULAR PURPOSE'''}} 

<br> 

----

= Summary =

This article explains how to '''update the pre-installed software''' of your IGEP Processor Board to a current release. This will update to the latest available version of the pre-installed software, which consists of IGEP X-Loader, IGEP Kernel and the IGEP firmware Yocto. 

This tutorial will follow the following steps: 

#'''Download the latest firmware''' from ISEE in a Linux PC. 
#Run a script that will automatically setup and '''create a MicroSD card''' with the latest software in your host PC. 
#Then '''boot your IGEP Processor Board''' from that MicroSD card you have just created. 
#Finally, you can write the updated software from the MicroSD to the '''flash memory''' on your IGEP device.

{{Message/Information Message|message=If you want to run a '''different software distribution''', you can follow this article: [[How to boot from MicroSD Card]].}} 

<br>

{{Message/Forum}}


= How to create a SD-card with the latest software image  =

''(from [[How to create a SD-card with the latest software image]])'' {{:How to create a SD-card with the latest software image}} 

= How to flash the latest software image  =

''(from [[How to flash the latest software image]])''

{{:How to flash the latest software image}}

= Pre-installed software on IGEP Processor Boards  =
''(from [[Pre-installed_software_on_IGEP_Processor_Boards]])'' 
{{#lst:Pre-installed_software_on_IGEP_Processor_Boards}}

[[Category:Software]] [[Category:Boot_loaders]] [[Category:Linux_Kernel]] [[Category:Software_distributions]]