Personal tools

Log in

Changes

From IGEP - ISEE Wiki

Jump to: navigation, search

What can I do with IGEPv2

1,112 bytes added, 17:07, 5 September 2012
no edit summary
{{#lst:How to use RS485|overview}}
 
A detailed guide on how use UARTS can be found by following this link: [[How to use RS485]]
== Get sound in (audio in) ==
$ aplay audio-in.wav
== How to change the monitor resolution use wifi == If you hve a wireless network adapter in your computer you can also connect to the board using the ad hoc network connection that the firmware configures byu default. Use your wireless manager to connect toi the wireless network called in the form  IGEP_xx After connecting, a DHCP IP address should be adquired. Now you can access, for example with ssh, to the target board connecting to the 192.168.7.1 address.  ssh root@192.168.7.1
== A detailed guide on how use wifi can be found by following this link: [[How to use setup Marvell 88w8686 SDIO wifi ==]]
== How to use bluetooth ==
== [[How to test 3D acceleration ==setup Marvell bluetooth]]
== How to use the SD card ==
 
You can connect a micro SD card for storage. After plugin the SD card the kernel should detect the card and automount in /media directory.
== How to use the USB OTG ==
== How In order to act in host mode and add some peripherals like keyboard, mouse or pendrives you require a special cable that grounds the ID pin. Since the OTG port only provides 100mA of power a USB hub is recommended. Though a common USB Standard-A to Mini-B type cable the port acts as a device. In this mode you can connect to the board using the USB Ethernet Gadget. Use this cable between your computer and the target board and connect with:  ssh root@192.168.6.1 A detailed guide on how use the wifi can be found by following this link: [[Using USB HOST ==ethernet gadget to communicate]]
{{Template:Navigation/IGEP Technology Guides/What can I do/Ending}}
[[Category:IGEP Technology Devices Guides]]
0
edits
Retrieved from "http://labs.isee.biz/index.php?title=Special:MobileDiff/7734"