0
edits
Changes
From IGEP - ISEE Wiki
m
If you followed the previous section you have IGEPv2 with the latest firmware '''running from MicroSD card'''. But you might want {{:How to write the firmware to the flash memory, so '''you won't need the MicroSD card when booting''' the board. The latest software provided by ISEE has a script that flashes the content of your MicroSD Card to the flash memory in your IGEPv2. You have to run this script, that is located at /opt/firmware directory. Log into IGEPv2 and run the following commands: cd /opt/firmware ./flash.sh This will last a few minutes. When it is ready, unplug the SD card from IGEPv2 and reboot the board: reboot You will have the new firmware running from IGEPv2 flash memory.image}}
→Flash the latest software image
== Flash the latest software image ==
IGEPv2 can run many other software distributions. Check the [[:Category:Software distributions]] to learn how to install other distributions.
== Basic instructions ==
