0
edits
Changes
From IGEP - ISEE Wiki
m
→Updating the pre-installed software
The first thing you'll need to do is to '''download the latest firwmare''' from ISEE.
At your '''Linux host PC''' you should open '''Terminal''' and type the following command: wget http://downloads.igep.es/binaries/firmware/poky-firmware-3.3.1-10.tar.gz * Or download it from: http://www.isee.biz/component/zoo/item/igep-firmware
Download it from: http://www.isee.biz/products/processor-boards/igepv2-board
2) ''' Uncompressing the downloaded file'''
Therefore, you are ready to try it. '''Plug the MicroSD card into IGEPv2''' and '''power up your board'''.
=== Flashing the software image ===
