== Boot from SATA ==
'''under construction'''As specified in SMARC the booting device can be chosen by a combination of jumpers. To boot from carrier SATA, a SATA disk must be present in J1103 mSATA connector, and no jumpers should be connected in J1202, leaving BOOT0, BOOT1 and BOOT2 pulled down to GND. For more information, refer to [http://www.sget.org/fileadmin/_migrated/content_uploads/SMARC_Hardware_Specification_V1p1.pdf SMARC Hardware Specification Guide].
== Boot from eMMC ==
'''under construction'''As specified in SMARC the booting device can be chosen by a combination of jumpers. To boot from module eMMC Flash, jumpers should be connected to BOOT1 and BOOT2 in J1202, leaving BOOT0 pulled down to GND. For more information, refer to [http://www.sget.org/fileadmin/_migrated/content_uploads/SMARC_Hardware_Specification_V1p1.pdf SMARC Hardware Specification Guide].
== How to use EEPROM ==
