49
edits
Changes
From IGEP - ISEE Wiki
no edit summary
{{Table/IGEP Technology Devices|Tech_Family={{#lst:Template:Links|IGEP_SMARC_EXPANSION_Tech_Family}}|Tech_ID={{#lst:Template:Links|IGEP_SMARC_EXPANSION_Tech_ID}}|Name={{#lst:Template:Links|IGEP_SMARC_EXPANSION_Name}}|Image={{#lst:Template:Links|IGEP_SMARC_EXPANSION_Image}}|ISEE_MainPage={{#lst:Template:Links|IGEP_SMARC_EXPANSION_ISEE_MainPage}}|ISEE_Hardware={{#lst:Template:Links|IGEP_SMARC_EXPANSION_ISEE_Hardware}}}} == How to use IGEP SMARC Expansion RS232 (am335x SMARC module) == The IGEP SMARC Expansion RS232 through J800 connector. <br> <br> {| cellspacing="1" cellpadding="1" width="200" border="1" align="center"|-| [[Image:RS232_BASE0040.jpg|600px]]|} === Connection test === Connect the SMARC base RS232 RX2 and TX1 to host using a null modem cable. <br> <br> In the host side open a minicom program with: <br> minicom -D /dev/ttyUSB0 (if you are using a usb-serial converter). {| cellspacing="1" cellpadding="1" width="200" border="1" align="center"|-| [[Image:TEST_RS232_BASE0040.jpg|600px]]|}In the SMARC side write the commands: <br> stty -F /dev/ttyO3 speed 115200 cs8 -cstopb -parenb (in order to configure the device /dev/ttyO3). <br> echo 'hello host''under construction'''> /dev/ttyO3 (sent the message "hello host" to ttyO3). <br> cat /dev/ttyO3 (recive the messages from host) == How to use IGEP SMARC Expansion HDMI (am335x SMARC module) == Using the official firmware for boot the am335x, just plug the hdmi to J500 connector. <br>The video configuration can be modified in DTS file (am335x-igep-igep0034.dtsi). <br> {| cellspacing="1" cellpadding="1" width="200" border="1" align="center"|-| [[Image:HDMI_AM335x_BASE0040.jpg|800px]]|}
