Difference between revisions of "What can I do with IGEP SMARC EXPANSION"
From IGEP - ISEE Wiki
(→Connection test) |
(→How to use IGEP SMARC Expansion RS232) |
||
| Line 1: | Line 1: | ||
| − | == How to use IGEP SMARC Expansion RS232 == | + | == How to use IGEP SMARC Expansion RS232 (am335x SMARC module) == |
The IGEP SMARC Expansion RS232 through J800 connector. <br> <br> | The IGEP SMARC Expansion RS232 through J800 connector. <br> <br> | ||
Revision as of 12:30, 23 March 2017
How to use IGEP SMARC Expansion RS232 (am335x SMARC module)
The IGEP SMARC Expansion RS232 through J800 connector.
|
Connection test
Connect the SMARC base RS232 RX2 and TX1 to host using a null modem cable.
In the host side open a minicom program with:
minicom -D /dev/ttyUSB0 (if you are using a usb-serial converter).
|
In the SMARC side write the commands:
stty -F /dev/ttyO3 speed 115200 cs8 -cstopb -parenb (in order to configure the device /dev/ttyO3).
echo 'hello host' > /dev/ttyO3 (sent the message "hello host" to ttyO3).
cat /dev/ttyO3 (recive the messages from host)
