Changes

What can I do with IGEP RADAR SENSOR ORION

19,450 bytes removed, 08:52, 29 July 2013

no edit summary

}}

= ~~Expansion connector~~ Interfacing with the sensor =

~~Expansion connector JC1 is intended for~~ You can control the sensor and ~~monitoring~~ get IF signal directly or through included ADC by means of ~~internal radar sensor ORION signals~~different expansion connectors.

The included DDS modulator can be programmed with a set of different modulation ramps through the SPI link available on the expansion connectors.

The IF signal can be obtained directly in analog format or already sampled by the included ADC through the same SPI link used to program the DDS modulator.

The following paragraphs give you the pin-out of the different expansion connectors: = Expansion connector-I = Expansion connector JC1 is intended for control and monitoring of internal radar sensor ORION signals. == JC1 pin-out ==

[[Image:Table-orions.jpg]]

== NOMENCLATURE ==

<!--[if gte mso 9]><xml>

<o:Version>12.00</o:Version>

</o:DocumentProperties>

</xml><![endif]-->

<!--[if gte mso 9]><xml>

mso-bidi-theme-font:minor-bidi;}

</style>

<![endif]--><span lang="EN-US~~" style="font-size:11.0pt;line-height:115%;font-family:"Calibri","sans-serif";mso-fareast-font-family:Calibri;mso-bidi-font-family:"Times New Roman";mso-ansi-language:EN-US;mso-fareast-language:EN-US;mso-bidi-language:AR-SA~~">Function names marked with ''gray shading'' ~~denote~~ (1) indicates that are available only on demand

<~~span lang="EN-US" style="font-size:11.0pt;line-height:115%;font-family:"Calibri","sans-serif";mso-fareast-font-family:Calibri;mso-bidi-font-family:"Times New Roman";mso-ansi-language:EN-US;mso-fareast-language:EN-US;mso-bidi-language:AR-SA" /~~br>

*  &~~quot~~nbsp;~~Calibri~~     '''PIN''':      PIN NUMBER OF THE CONNECTOR. SUBINDEX MEANING: o  PW: Power Line <!span lang="EN-~~-[if gte mso 9]~~US"><~~xml~~span style="mso-list:Ignore"> o<~~o:DocumentProperties~~span>   ~~<o:Version>12.00~~</~~o:Version~~span> </~~o:DocumentProperties~~span></~~xml~~span><~~![endif]~~span lang="EN-US" style="mso-bidi-font-family: TimesNewRoman">DIG: CMOS DIGITAL SIGNAL PORT 1V8 LOGIC LEVELS

~~~~ ·o~~     ~~  ~~'''~~PIN''':       PIN NUMBER OF THE CONNECTOR. SUBINDEX MEANINGDIG3:CMOS DIGITAL SIGNAL PORT 3V3 LOGIC LEVELS

o  PWDIG5: ~~Power Line~~CMOS DIGITAL SIGNAL PORT 5V LOGIC LEVELS

o  ~~DIG~~ANA: ~~CMOS DIGITAL SIGNAL~~ ANALOG PORT ~~1V8 LOGIC LEVELS~~

o &~~quot~~nbsp;~~Courier New~~NC: PIN NOT CONNECTEDo&~~nbsp~~lt;span /&~~nbsp~~gt;~~<~~DIG3: CMOS DIGITAL SIGNAL PORT 3V3 LOGIC LEVELS<~~/~~span>>

o  ~~DIG5~~ (L): ~~CMOS DIGITAL SIGNAL PORT 5V LOGIC LEVELS~~ACTIVE LOW LEVEL

o  ~~ANA~~(H): ~~ANALOG PORT~~ACTIVE HIGH LEVEL

*o    &~~quot~~nbsp;~~Times New Roman"">~~  ~~NC: PIN NOT CONNECTED~~

~~·       ~~'''LEVEL:~~             ~~  ~~NAME~~'''~~: FUNCTION OF THIS PORT. SUPERINDEX MEANING:~~IS THE NOMINAL VOLTAGE LEVEL

*o    &~~quot~~nbsp;~~Times New Roman"">~~  ~~ (L): ACTIVE LOW LEVEL~~

'''~~o  ~~'''~~(H): ACTIVE HIGH LEVEL~~IS THE MODE 0 function pinname of OMAP microcontroller

*·       ~~'''LEVEL:  ''' IS THE NOMINAL VOLTAGE LEVEL~~

'''~~·       ~~'''~~MODE 0~~  ~~'''~~  IS THE ~~MODE 0 function pinname of OMAP microcontroller~~ABSOLUTE MAXIMUM ALLOWED VOLTAGE LEVEL ON THIS PIN (PERMANENT DAMAGE IF HIGHER VOLTAGE)

*· ~~ ~~      '''MAX:'''    IS THE ABSOLUTE MAXIMUM ALLOWED VOLTAGE LEVEL ON THIS PIN (PERMANENT DAMAGE IF HIGHER VOLTAGE)

~~·       ~~'''FUNCTION:'''        DESCRIPTION OF PIN SIGNAL

o

'''(1):        '''ISEE INTERNAL

USE TEST PIN. AVAILABLE ONLY ON DEMAND<>

o  '''(2):'''        INPUT when power supply is applied to radar board. OUTPUT in other case.

= IGEPv2 Expansion =

[[Image:Table orion JC2.jpg]]

= IGEP COM MODULE Expansion =

2 expansion connectors are needed to interface radar sensor ORION with processor board IGEP COM MODULE: JC3 & JC4 == JC3 pin-out == [[Image:Table orion JC3.jpg]] == Expansion connector JC4 == [[Image:Table orion JC4.jpg]]

~~== JC3 pin-out ==~~

~~[[Image:Table orion JC3.jpg]]~~

=~~= Expansion connector JC4~~ Applications == You can see a complete list of applications of the radar sensor ORION combined with a processor board on this link: [http://labs.isee.biz/index.php/What_can_I_do_with_IGEP_RADAR_LAMBDA#Radar_Applications:_Examples RADAR APPLICATIONS]

~~[[Image:Table orion JC4.jpg]]~~

{{Template:Navigation/IGEP Technology Guides/What can I do/Ending}}

[[Category:~~IGEP Technology Devices Guides~~IGEP_Technology_Devices_Guides]]

← Older edit

Carles Recasens

646

edits

Personal tools

Search

Namespaces

Views

Export pages

Actions

Changes

From IGEP - ISEE Wiki

What can I do with IGEP RADAR SENSOR ORION

Navigation menu

External Links

Special pages