0
edits
Changes
m
__TOC__
<pre> $ i2cset -f -y 3 0x51 0x10 0x22 $ i2cget -f -y 3 0x51 0x10</pre>
<pre> $ evtest /dev/input/event0 </pre>
no edit summary
}}
= Overview =
We will learn some basic tasks.
__TOC__
= What can I do =
== How to use TFT and Touchscreen ==
[[Image:berlin_paris_screen_connectors.JPG|right|200px]] IGEP PARIS Expansion supports SEIKO 7” LCD screen. Use J200, J203 and J204 connectors to attach screen. See image for more details.
By default, Seiko screen is supported by default in IGEP PARIS, But make sure that it is enable using the following steps: Edit . However open igep.ini file to configure your touch screen, you can do this [[How_do_I_edit_my_kernel_command_line | adding checking following kernel cmdline parameter]]*Add the following line:<pre>omapdss.def_disp=lcd-70</pre><br><br>
== How to use EEPROM ==
The following example writes the value 0x22 to register 0x10 of device 0x50 on i2c bus 3:
''From [[How to use EEPROM]]''
== How to use serial console ==
[[Image:Paris db9.jpg|right|200px]]Connect a DV9 DB9 cable between IGEP PARIS and Host PC. Open the serial on your PC using your preferred serial communications program (minicom) and configure the port as follows:
* 115200
== How to use SW101 button ==
IGEP PARIS has a button configured like GPIO. You can test it using the following program:
Now press the button and see program traces.
{{Template:Navigation/IGEP Technology Guides/What can I do/Ending}}
[[Category:IGEP Technology Devices Guides]]