__TOC__= Overview = This is the 2/3 chapter of the Getting Started with IGEP COM MODULE Tutorial Guide.
= Overview =In this second chapter, we will learn some basics tasks. Upon completion, you will be ready to continue with chapter 3/3 that explains more advanced tasks.
This is the 2/3 chapter of IGEP COM MODULE Tutorial Guide.__TOC__
We will learn some basic tasks.
= What can I do =
You must logged in the board.
== Handle the gpio-LED's ==
{{#lst:How to handle the gpio-LED|IGEP_COM_MODULE}}
''From == Handle the GPIO-LEDS == The board has two user bicolor (green/red) leds available that can be controlled. In its simplest form, you can control of LEDs fromuserspace. LEDs appear in /sys/class/leds/ and you can turn on and off with following commands: $ echo 1 > /sys/class/leds/d210\:red/brightness $ echo 0 > /sys/class/leds/d210\:red/brightness $ echo 1 > /sys/class/leds/d440\:green/brightness $ echo 1 > /sys/class/leds/d440\:red/brightness A detailed guide on how use GPIO-LEDS can be found by following this link: [[How to handle the gpio-LED]]'' {{Table/IGEP Technology Devices|Tech_Family={{#lst= How to use wifi == If you have a wireless network adapter in your computer you can also connect to the board using the ad hoc network connection that the firmware configures by default. Use your wireless manager to connect to the wireless network called in the form IGEP_xx After connecting, a DHCP IP address should be adquired. Now you can access, for example via ssh, to the target board connecting to the 192.168.7.1 address. $ ssh root@192.168.6.1 A detailed guide on how use wifi can be found by following this link:Template:Links|IGEP_COM_MODULE_Tech_Family}}[[Using IGEP WLAN to communicate]] |Tech_ID={{#lst= How to use bluetooth == A detailed guide on how use wifi can be found by following this link:Template:Links|IGEP_COM_MODULE_Tech_ID}}[[How to setup Marvell bluetooth]] |Name={{#lst:Template:Links|IGEP_COM_MODULE_Name}}= How to use the SD card == |Image={{#lst:Template:Links|IGEP_COM_MODULE_Image}}You can connect a micro SD card for storage. After plugin the SD card the kernel should detect the card and automount in /media directory.|ISEE_MainPage={{#lst:Template:Links|IGEP_COM_MODULE_ISEE_MainPage}}|ISEE_Hardware={{#lst:Template:Links|IGEP_COM_MODULE_ISEE_Hardware}}Navigation/IGEP Technology Guides/What can I do/Ending}}
[[Category:IGEP Technology Devices Guides]]
