What can I do with IGEP AQUILA EXPANSION
This is a work in progress article. Help other developers like you in the IGEP Community by improving it! |
|
|
Contents
Overview
This is the 2/3 chapter of the Getting Started with IGEP AQUILA EXPANSION Tutorial Guide.
In this second chapter, we will learn some basics tasks. Upon completion, you will be ready to continue with chapter 3/3 that explains more advanced tasks.
What can I do
You must be connected to the board using serial interface.
How to use Ethernet
IGEP COM AQUILA uses lightweight SSH server dropbear to accept SSH remote connections.
In your open serial interface connection, find the private IP assigned via DHCP:
root@igep0033:~# ifconfig eth0 | grep "inet addr" inet addr:192.168.2.173 Bcast:192.168.2.255 Mask:255.255.255.0
In my case was 192.168.2.173. Connect to the board using the SSH protocol
ssh root@192.168.5.1
An empty password for root user should work to access to the shell prompt.
How to use audio HDMI
How to use LEDs
How to use Reset Button
How to use EEPROM
How to use USB OTG
You have successfully completed this chapter of the guide.
|
If you have any question, don't ask to ask at the IGEP Community Forum or the IGEP Community Chat |