4,199
edits
Changes
From IGEP - ISEE Wiki
m
{{Message/Work in progress}}
IGEP COM AQUILA uses lightweight SSH server dropbear to accept SSH remote connections.In your Host Machine, open a terminal sessions set up an Ethernet alias for your network interface,
In your open serial interface connection, find the private IP assigned via DHCP $ sudo ifconfig eth0:0 192.168.5.10
<pre>root@igep0033:~# ifconfig eth0 | grep "inet addr" inet addr:192.168.2.173 Bcast:192.168.2.255 Mask:255.255.255.0</pre>Connect to the board using the SSH protocol
In my case was 192.168.2.173. Connect to the board using the SSH protocol<pre> $ ssh root@192.168.25.173 </pre>1
== How IGEP COM AQUILA contains multiple I2S peripherals one of them is connected to use audio HDMI ==transceiver. Then you can easily play a *.wav sound with the application Aplay, for example:
* Download a WAV sample:<pre>wget http://www-mmsp.ece.mcgill.ca/Documents../AudioFormats/WAVE/Samplesaplay /AFspopt/M1F1-float32WE-AFsp.wav</pre>* Play the WAV sample:<pre>aplay M1F1-float32WE-AFsptest.wav</pre>
'''under construction'''A detailed guide on how use Ethernet Gadget can be found by following this link: [[Using USB ethernet gadget to communicate]]
no edit summary
{{Table/IGEP Technology Devices
|Tech_Family={{#lst:Template:Links|IGEP_AQUILA_EXPANSION_Tech_Family}}
= What can I do =
You must be connected to logged in the board using serial interface. == Remote connection via Ethernet ==
{{Message/Information Message|title=|message= How If you aren't using a Linux operating system, use [http://labs.isee.biz/index.php/IGEP_SDK_Virtual_Machine IGEP SDK Virtual Machine] to use Ethernet ==connect to the board}}
An empty password for root user should work to access to the shell prompt.
== Flash internal memory How to use audio HDMI == uSD firmware contains the roofs available to write the firmware to the flash memory. *Use igep-flash script to write the internal memory:<pre> igep-flash --machine igep0033 --image /opt/firmware/core-image-validation-igep0033-20130916081322.rootfs.tar.bz2 </pre> When finish, power off your board, mount J101 jumper, unplug micro SD card and power on the board. That's all, enjoy the new firmware running from the flash memory.
== How to use LEDs ==
== How to use USB OTG ==
The base can be powered though USB OTG connector. It, but it's recomended recommended use an external USB hub. Connect the Use an USB Standard-A to Mini-B type cable between the base and the USB huband connect with: <pre>ssh root@192.168.7.1</pre>
{{Template:Navigation/IGEP Technology Guides/What can I do/Ending}}
[[Category:IGEP Technology Devices Guides]]
