4,199
edits
Changes
From IGEP - ISEE Wiki
m
{{Message/Work in progress}}
IGEP COM AQUILA uses lightweight SSH server dropbear to accept SSH remote connections.In your Host Machine, open a terminal sessions set up an Ethernet alias for your network interface,
In your open serial interface connection, find the private IP assigned via DHCP $ sudo ifconfig eth0:0 192.168.5.10
<pre>root@igep0033:~# ifconfig eth0 | grep "inet addr" inet addr:192.168.2.173 Bcast:192.168.2.255 Mask:255.255.255.0</pre>Connect to the board using the SSH protocol
In my case was 192.168.2.173. Connect to the board using the SSH protocol<pre> $ ssh root@192.168.5.1 </pre>
== How to use IGEP AQUILA EXPANSION contains a 32 Kb EEPROM . EEPROM can be read and write via /sys/devices/ocp.2/44e0b000.i2c/i2c-0/0-0050/eeprom:* Write EEPROM:<pre>echo "data" > /sys/devices/ocp.2/44e0b000.i2c/i2c-0/0-0050/eeprom </pre>* Read EEPROM:<pre>cat ==/sys/devices/ocp.2/44e0b000.i2c/i2c-0/0-0050/eeprom</pre>
no edit summary
{{Table/IGEP Technology Devices
|Tech_Family={{#lst:Template:Links|IGEP_AQUILA_EXPANSION_Tech_Family}}
= What can I do =
You must be connected to logged in the board using serial interface. == Remote connection via Ethernet ==
{{Message/Information Message|title=|message= How If you aren't using a Linux operating system, use [http://labs.isee.biz/index.php/IGEP_SDK_Virtual_Machine IGEP SDK Virtual Machine] to use Ethernet ==connect to the board}}
An empty password for root user should work to access to the shell prompt.
== How to use audio HDMI ==
IGEP COM AQUILA contains multiple I2S peripherals one of them is connected to HDMI transceiver. Then you can easily play a * Download a WAV sample.wav sound with the application Aplay, for example: <pre>wget http:aplay /opt/www-mmsp.ece.mcgill.ca/Documents../AudioFormats/WAVE/Samples/AFsp/M1F1-float32WE-AFsp.wav</pre>* Play the WAV sample:<pre>aplay M1F1-float32WE-AFsptest.wav</pre>
== How to use LEDs ==
You can turn them down using the same command and write '0' instead of '1'.
== How to use Reset Button EEPROM =='''Under construction'''
== How to use USB OTG ==
The base can be powered though USB OTG connector, but it's recommended use an external USB hub. Use an USB Standard-A to Mini-B type cable between the base and the USB hub and connect with:
<pre>ssh root@192.168.7.1</pre>
A detailed guide on how use Ethernet Gadget can be found by following this link: [[Using USB ethernet gadget to communicate]]
{{Template:Navigation/IGEP Technology Guides/What can I do/Ending}}
[[Category:IGEP Technology Devices Guides]]
