== Booting your IGEPv2 board<br> == First of all, you may want to boot your board. IGEP0020 can boot#REDIRECT: *from a [[How to boot from MicroSD Card|MMC/microSD card]] (first priority in boot order). *from OneNAND memory. == Logging in<br> == Once the system is correctly configured you are ready to login. You What can I do it via: *Serial Console: [[Using serial debug port to communicate|herewith IGEPv2]] is a short explanation about how to correctly configure your Serial Console<br> *SSH The default login user is: root There is no password for this user. = Using the board LED's<br> = This is probably the most simple feature in the board, but sometimes LED's may be the only way of checking the status of some of your applications.<br> IGEP0020 has 4 LED's which you can control, for example, using 'echo': <pre>echo 1 > /sys/devices/platform/leds-gpio/leds/d240\:green/brightness echo 1 > /sys/devices/platform/leds-gpio/leds/d240\:red/brightness echo 1 > /sys/devices/platform/leds-gpio/leds/d440\:green/brightness echo 1 > /sys/devices/platform/leds-gpio/leds/d440\:red/brightness</pre> You can turn them down using the same command and write '0' instead of '1'.