4,199
edits
Changes
From IGEP - ISEE Wiki
m
{{Message/Information Message|title=|message= In this guide is used [[ IGEP firmware Yocto ]]}} == Connect to IGEP device<br> ==
'''''Thanks to Iñigo Lazkanotegi from Tecnalia (Donostia - San Sebastián) for this contribution.'''''
→Connect to IGEP device
<section begin=exclude />
{{Message/Information Message|title=|message= In this guide is used [[ IGEP firmware Yocto ]]}}
<section end=exclude />
== Overview ==
*Host PC
=== Linux ===
'''NOTE:''' You should have the usbnet module available for your Linux kernel. On most distributions, this is the case by default. If this is not the case for your distribution, you will need to enable USB networking support in the kernel. If you build your own kernel then you want 'CDC Ethernet support' in USB Network adaptors. IGEP SDK Virtual Machine has this module enabled.
<section begin=USB_linux />
*In the file /etc/network/interfaces, you should add:
<pre>iface usb0 inet dhcp</pre>
Linux igep00x0 2.6.37 #1 Thu Jul 19 09:07:47 CEST 2012 armv7l GNU/Linux
root@igep00x0:~#
<section end=USB_linux />
==== Troubleshooting ====
===== NFS in root filesystem =====
Don't use NFS in root filesystem combined with USB Ethernet Gadget
=== Windows and MAC OSX<br> ===
4. Use [http://www.chiark.greenend.org.uk/~sgtatham/putty/ PuTTy] to [[Using SSH to communicate|connect via SSH]] (192.168.7.2)<br>
= See also =