Changes

Using IGEP CAM OV5640 steps

554 bytes added, 17:19, 21 April 2017

no edit summary

= IGEP SMARC i.MX6 =

IGEP SMARC i.MX6 has support for IGEP CAM OV5640, download [http://downloads.isee.biz/pub/releases/firmware/igep_firmware-yocto-1.8-0-imx6q-igep0046.tar.bz2 firmware] or compile latest [http://labs.isee.biz/index.php/Yocto_Project_1.8_-_Poky_13.0.y_%22Fido%22 Yocto Project 1.8 - Poky 13.0.y "Fido"].

The following steps and results has been tested with IGEP SMARC Expansion (BASE0040).

<pre>gst-launch imxv4l2src fps-n=15 capture-mode = 6 num-buffers=1 device=/dev/video0 ! ffmpegcolorspace ! jpegenc ! filesink location=sample.jpg </pre>

* RTP Streaming (localhost loopback example):

** Receiver

<pre>gst-launch -v udpsrc caps="application/x-rtp,media=(string)video,clock-rate=(int)90000,encoding-name=(string)H264" port=5000 ! rtph264depay ! vpudec ! imxv4l2sink</pre>

** Sender

<pre>

gst-launch-0.10 -e -v imxv4l2src capture-mode=0 fps-n=30 device=/dev/video0 ! vpuenc codec=avc force-framerate=1 framerate-nu=25 ! rtph264pay ! udpsink host=127.0.0.1 port=5000 sync=false

</pre>

= IGEP COM MODULE =