88
edits
Changes
From IGEP - ISEE Wiki
no edit summary
= Overview =
This article contains information about HOWTO create a SD-Card to boot the demo camera software for IGEP COM MODULEprocessor boards. To see the camera output is recommended use an IGEPv2, IGEP BERLIN or IGEP PARIS connected to the DVI port.
'''IMPORTANT NOTE: This software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.'''
Under Linux, insert a SD-card media and use igep-media-create script to copy the image to SD-card media.
$ ./igep-media-create --mmc <mmc> --image ../../demo-image-camera-igep00x0-2012111220140206.tar.bz2 \ --machine <machine> --buddy camr0010camr00x0
where,
This should give you a bootable SD-card.
Now that you have the SD-card created you should configure the system for your sensor. To do that, just mount the boot partition of the SD-card and edit the igep.ini file, after the buddy=camr00x0 line, add the sensor type appending :
camr00x0.sensor=mt9v034
or
camr00x0.sensor=mt9p031
Finally, umount and eject the SD-card safely.
Insert the SD-card media into the micro-SD card socket of IGEP processor board and power on it. This should result in a running system with a serial login link.
Prompt into the login using the root account.
Run the live example ([http://git.ideasonboard.org/omap3-isp-live.git http://git.ideasonboard.org/omap3-isp-live.git]) typing:
# modprobe omap_vout
