4,199
edits
Changes
m
no edit summary
=== Overview ===
You can log into IGEP via many interfaces, such Serial, Wifi, USB-Ethernet Gadget, etc.
By default, all IGEP Processor boards have a static IP in their Ethernet interface which is 192.168.5.1 and dynamic IP address assigned via DHCP.
=== Requirements ===
There are some requisites to follow this guide:
*Host PC
=== Connect to IGEP device<br> ===
==== Linux ====
'''NOTE:''' You should have the usbnet module available for your Linux kernel. On most distributions, this is the case by default. If this is not the case for your distribution, you will need to enable USB networking support in the kernel. If you build your own kernel then you want 'CDC Ethernet support' in USB Network adaptors. IGEP SDK Virtual Machine has this module enabled.