Changes

Using Ethernet to communicate

2 bytes removed, 12:47, 29 August 2012

m

→‎Requirements

You can log into IGEP via many interfaces, such Serial, Wifi, USB-Ethernet Gadget, etc. In this tutorial we are going to connect to the board via its Ethernet interface. By default, all IGEP Processor boards have a static IP in their Ethernet interface which is 192.168.5.1 and dynamic IP address assigned via DHCP.

=== Requirements ===

There are some requisites to follow this guide:

• ← Older edit
• Newer edit →

Pau

4,199

edits