<br>
<br> <br> The first vehicle was tracked from 15 to 25m at a speed of 50Km/h
<br> The second vehicle was tracked from 18 to 33m at a speed of 59Km/h
The first A third vehicle was tracked from 15 20 to 25m 28m at a speed of 50Km52Km/h
The second Finally the fourth vehicle was tracked from 12 to 29m at a speed of 40Km/h
The bars indicate the range and speed in real time while the vehicles are being detected and cannot be shown in this picture but the graph reflects the history of the measurements.
<br>
There is not a fixed rule to obtain this threshold value because it depends on a lot of things, mainly of the modulation applied, the environment and the type of measurement, so the best is to make first some trials to adjust this value on an empirical way until the system works properly in your specific application and you obtain readable results.
You have to put this modulation parameters on the command block of the "Real Time" window and press enter.
<br>