Changes

User:Crecasens

326 bytes added, 13:45, 30 January 2013

no edit summary

This is the most interesting feature of the web application demo. By clicking on "Technical" icon you will get access to the heart of the radar. You will be able to make measurements with the modulation you want, by simply&nbsp; prompting the parameters on the rectangles.<br>

<br>

There are three sections:

There are three sectionsSECTION-1:RADAR CALIBRATION

SECTION-1: RADAR CALIBRATIONThis feature is for advanced measurements and we do not recommend to use on this chapter. It will be explained later.

This feature is for advanced measurements and we do not recommend to use on this chapter. It will be explained later.

SECTION-2: RADAR MEASUREMENT

This feature is interesting if you want to use the web application demo as a console where you can configure the radar with different modulations and get the results prompted on the screen or saved on a text file.SECTION-2: RADAR MEASUREMENT

For example, put in this section This feature is interesting if you want to use the next commands:web application demo as a console where you can configure the radar with different modulations and get the results prompted on the screen or saved on a text file.

You can see that the default parameters are: -T 800 F 3C0000 -s 50 -i 512 -S 80 -m 16 -w3. This is the same default modulation used on the Home Menu icons f(t) and F(jw). Now here you can remove these parameters and put what you want.

-T 800 means you want a modulation with 0For example,8ms sweep timeput in this section the next commands:

-T 800 -m 16 means that you want to make 16 consecutive measurements20

-w T 800 means that you want to write the captures on a file (there will be generated 16 filesmodulation with 0, one for each measurement, and each one with 2048 samples)8ms sweep time

You can check a complete explanation of each parameter on the user manual of the radar.-m 20 means that you want to make 20 consecutive measurements

You can check a complete explanation of each parameter on the user manual of the radar.

The result obtained over a wall at 4.8m distance is like this:

<br>

 

 

 

 

 

 

<br>

 

-w means that you want to write the captures on a file (there will be generated 16 files, one for each measurement, and each one with 2048 samples)

 

<br>

RADAR CONTINUOUS MODE

• ← Older edit
• Newer edit →

Carles Recasens

646

edits