'''NOTE:''' You can speed up flash procedure. By default the flash script runs the nandtest command to mark bad blocks, this can take a long time and in most cases is not necessary, you can speed up the flash procedure running the script as follows:
<pre>igep-flash --image /opt/firmware/demo-image-sato-igep00x0.tar.bz --skip-nandtest </pre>
= Firmware releases =
<span style="color: red;">'''IMPORTANT NOTE (Update on February 29th, 2012): '''
IGEP™ Processor Boards with new 512 MB RAM and 512 MB NAND flash from Micron require a recent version of IGEP X-LOADER and KERNEL ottherwise they won't boot correctly. Bootable microSD cards with software older will not boot these upgraded COMs. Follow the “IGEP™ firmware update procedure” to update to the latest firmware version.
</span>
<span style="color: red;">
The required minimum versions of software that supports the new flash are v2.4.0-2 for IGEP X-LOADER and 2.6.37-2 for KERNEL
</span>
<span style="color: red;">
'''Bootable boards and MicroSD cards with software older than version 3.3.1-11 will not boot properly, please update to the latest version'''
</span>
----
*'''Poky Image Sato Release 3.3.1-11'''
**What's new ?
***Support for new 512 MB RAM and 512 MB NAND flash from Micron
***Updated kernel to the latest stable release 2.6.37-2, see [[Linux Kernel 2.6.37.y]] for details
***Updated IGEP X-LOADER to 2.4.0-2
**Supported IGEP™ products.
***Boards :
****IGEP™ v2
****IGEP™ COM MODULE
****IGEP™ COM PROTON
***Expansion boards :
****IGEP™ v2 EXPANSION
****IGEP™ BERLIN
****IGEP™ PARIS
****IGEP™ NEW YORK
[[Category:Software]] [[Category:Boot_loaders]] [[Category:Linux_Kernel]] [[Category:Software_distributions]]