Personal tools

Log in

Changes

From IGEP - ISEE Wiki

Jump to: navigation, search

Update the PRE-INSTALLED software image to a current release

731 bytes removed, 16:14, 2 March 2016
no edit summary
<br>
= Pre-installed software on IGEP Processor Boards ={{Message/Forum}}
{{#lst:Pre-installed_software_on_IGEP_Processor_Boards|overview}}
 
{{#lst:Pre-installed_software_on_IGEP_Processor_Boards|about}}
= How to create a SD-card with the latest software image =
= How to flash the latest software image =
Now you have a booted board with latest firmware running ''(from MicroSD card, you can write the firmware [[How to flash the flash memory. latest software image]])''
Enter {{:How to flash the IGEP Processor Board using root as login name and an empty password, enter to the /opt/firmware and run the igep-flash script <pre>igep-flash --image /opt/firmware/demo-latest software image-sato-igep00x0.tar.bz</pre> When finish, power off your board, unplug the micro-SD card and power on the board. That's all, enjoy the new firmware running from the flash memory. }}
= Pre-installed software on IGEP Processor Boards ='''NOTE:(from [[Pre-installed_software_on_IGEP_Processor_Boards]])''' You can speed up flash procedure. By default the flash script runs the nandtest command to mark bad blocks, this can take a long time and in most cases is not necessary, you can speed up the flash procedure running the script as follows{{#lst: <pre>igep-flash --image /opt/firmware/demo-image-sato-igep00x0.tar.bz --skipPre-nandtest </pre>installed_software_on_IGEP_Processor_Boards}}
[[Category:Software]] [[Category:Boot_loaders]] [[Category:Linux_Kernel]] [[Category:Software_distributions]]
Retrieved from "http://labs.isee.biz/index.php?title=Special:MobileDiff/6567...10483"