88
edits
Changes
From IGEP - ISEE Wiki
no edit summary
{{Message/Information Message|title=TITLE|message='''IMPORTANT NOTE''': This software is distributed in the hope that it will be useful, but '''WITHOUT ANY WARRANTY''';without even the implied warranty of '''MERCHANTABILITY''' or '''FITNESS FOR A PARTICULAR PURPOSE'''}}
<br>
----
#'''Download the latest firmware''' from ISEE in a Linux PC.
#Run a script that will automatically setup and '''create a MicroSD card''' with the latest software in your host PC.
#Then '''boot your IGEP Processor Board''' from that MicroSD card you have just created.
#Finally, you can write the updated software from the MicroSD to the '''flash memory''' on your IGEP device.
{{Message/Information Message|message= How If you want to create run a SD-card with latest '''different software image =distribution''', you can follow this article: [[How to boot from MicroSD Card]].}}
= How to create a SD-card with the latest software image http://www.isee.biz/products/processor-boards/igepv2-board for IGEPv2=
= How to flash the latest software image http://www.isee.biz/products/processor-boards/igep-com-proton for IGEP COM PROTON=
''(from [[How to flash the latest software image]])''
= Pre-installed software on IGEP Processor Boards tar xzf poky-firmware=''(from [[Pre-3.3.1-11.tar.gzinstalled_software_on_IGEP_Processor_Boards]])'' cd poky-firmware-3.3.1{{#lst:Pre-11/installed_software_on_IGEP_Processor_Boards}}