<br>{{Message/Information Message| widthtitle="97%" cellspacing="4" cellpadding="4" border="0" align="center"|-| bgcolor="#ff0000" | [[Image:Warning_icon.png|left|52x47px]]<span stylemessage="color: rgb(255, 255, 255);">'''IMPORTANT NOTE''': This software is distributed in the hope that it will be useful, but '''WITHOUT ANY WARRANTY'''; without even the implied warranty of '''MERCHANTABILITY''' or '''FITNESS FOR A PARTICULAR PURPOSE'''</span>|}}<br><hr><br>
By default, if you power up your board it will run the software on the flash. But '''you can prepare a MicroSD card and boot from it''' by inserting it to the MicroSD card reader of your IGEP Processor Board, as it has more priority than the flash.----
<br>If you have a brand new IGEP Processor Board you must know that '''it comes with a firmware''' provided and installed on it by ISEE.= Summary =
<br>Therefore, when you power up your board it This article explains how to '''boots update the pre-installed software'''of your IGEP Processor Board to a current release. This will update to the latest available version of the pre-installed software, which consists on a minimal '''Linuxof IGEP X-based distribution''' with a lite X Window System Loader, IGEP Kernel and GNOME Mobile based applications created with Poky Platform Builderthe IGEP firmware Yocto.
<br>If you want to '''update your pre-installed software''', you can '''create a MicroSD card''' in your host PC with This tutorial will follow the latest sofwtare. Then boot your IGEP Processor Board from that MicroSD card.following steps:
<br>#'''Download the latest firmware''' from ISEE in a Linux PC. #Run a script that will automatically setup and '''create a MicroSD card''' with the latest software in your host PC. #Then '''boot your IGEP Processor Board''' from that MicroSD card you have just created. #Finally, you can write the updated software from the MicroSD to the '''flash memory ''' on your IGEP device.
<br>This How-To is meant {{Message/Information Message|message=If you want to be run a starting point for people to learn to:* '''create a SD card with latest firmwaredifferent software distribution''' available* write it , you can follow this article: [[How to the flash memoryboot from MicroSD Card]].}}
for any IGEP Processor Board as quickly and easily as possible.
<br>
<br>
Note: this How-To was tested with an Ubuntu 10.04 host machine, but most of the contents are valid also for other GNU/Linux distributions. We do not issue any guarantee that this will work on other distributions.
<br>
= How to create a SD-card with latest software image =
The first thing you'll do is download latest firwmare
wget http://downloads.igep.es/binaries/firmware/poky-firmware-3.3.1-10.tar.gz
Next, untar the firmware and enter to the directory
tar xzf poky-firmware-3.3.1-10.tar.gz
cd poky-firmware-3.3.1-10/
Insert your SD card into the host machine (the machine you downloaded the firmware), and run following command
./poky-media-create --mmc [device] --binary poky-image-sato-igep00x0-[timestamp].tar.gz --machine [machine]
where:
* [device] is the SD card device name, for example: /dev/sdb
* [machine] is the machine name, options are
** igep0020
** igep0030
** igep0032
Finally plug the SD card into IGEP device and power up your board.{{Message/Forum}}
= How to flash the latest software image =
Now you have = How to create a booted board with latest firmware running from SD -card, you can write with the firmware to the flash memory.latest software image =
Enter ''(from [[How to create a SD-card with the IGEP device using root as login name and an empty password, enter latest software image]])'' {{:How to create a SD-card with the /opt/firmware an run the ./flash scriptlatest software image}}
= How to flash the latest software image cd /opt/firmware ./flash.sh=
When finish, unplug the SD card and reboot the board, enjoy the new firmware running ''(from [[How to flash memory.the latest software image]])''
= Firmware releases ={{:How to flash the latest software image}}
* = Pre-installed software on IGEP Processor Boards ='''Poky Image Sato Release 3.3.1(from [[Pre-10'installed_software_on_IGEP_Processor_Boards]])''** What's new ?*** Updated kernel to the latest stable release 2.6.37{{#lst:Pre-1, see http://labs.igep.es/index.php/Linux_Kernel_2.6.37.y for details** Supported IGEP products.*** Boards : **** IGEP v2**** IGEP COM MODULE**** IGEP COM PROTON***Expansion boards :**** IGEP v2 EXPANSION**** IGEP BERLIN**** IGEP PARIS**** IGEP NEW YORKinstalled_software_on_IGEP_Processor_Boards}}
[[Category:Software]][[Category:Software applicationsBoot_loaders]][[Category:Software distributionsLinux_Kernel]][[Category:TutorialsSoftware_distributions]]
