88
edits
Changes
From IGEP - ISEE Wiki
no edit summary
{{Message/Information Message|title= How to create a SD-card with latest |message='''IMPORTANT NOTE''': This software image =is distributed in the hope that it will be useful, but '''WITHOUT ANY WARRANTY''';without even the implied warranty of '''MERCHANTABILITY''' or '''FITNESS FOR A PARTICULAR PURPOSE'''}}
<br> ---- = Summary = This article explains how to '''update the pre-installed software''' of your IGEP Processor Board to a current release. This will update to the latest available version of the pre-installed software, which consists of IGEP X-Loader, IGEP Kernel and the IGEP firmware Yocto. This tutorial will follow the following steps: #'''Download the latest firmware''' from ISEE in a Linux PC. #Run a script that will automatically setup and '''create a MicroSD card''' with the latest software in your host PC. #Then '''boot your IGEP Processor Board''' from that MicroSD card you have just created. #Finally, you can write the updated software from the MicroSD to the '''flash memory''' on your IGEP device. {{Message/Information Message|message=If you want to run a '''different software distribution''', you can follow this article: [[How to boot from MicroSD Card]].}} <br> {{Message/Forum}} = How to create a SD-card with the latest software image = ''(from [[How to create a SD-card with the latest software image]])'' {{:How to create a SD-card with the latest software image}} = How to flash the latest software image = ''(from [[How to flash the latest software image]])'' {{:How to flash the latest software image}} = Pre-installed software on IGEP Processor Boards =''(from [[Pre-installed_software_on_IGEP_Processor_Boards]])'' {{#lst:Pre-installed_software_on_IGEP_Processor_Boards}} [[Category:Software]] [[Category:Boot_loaders]] [[Category:Linux_Kernel]] [[Category:Software_distributions]]
