Difference between revisions of "U-Boot Texas Instruments Series"
From IGEP - ISEE Wiki
Manel Caro (talk | contribs) (→What next...) |
Manel Caro (talk | contribs) (→U-Boot 2015.04.y [EOL]) |
||
Line 60: | Line 60: | ||
* Boot from Network. | * Boot from Network. | ||
− | + | __TOC__ | |
− | |||
− | |||
− | + | =Introduction= | |
+ | This article is for '''specific 2014.01.y U-Boot branch''' serie.<br /> | ||
+ | It is interesting read [[The bootloader U-Boot]] article previously. | ||
− | + | On this 2014.01.y version, supported IGEP Processor Boards are: | |
− | + | * IGEPv5 (IGEP0050) | |
− | + | Binaries: latest stable u-boot version is: '''2014.01-0-omap5 (20140131)''' | |
− | |||
− | + | {| border="1" | |
+ | |- | ||
+ | !|'''Platform''' | ||
+ | !|'''Sources''' | ||
+ | !|'''SPL binary''' | ||
+ | !|'''U-Boot binaries''' | ||
+ | |- | ||
+ | || IGEP0050 | ||
+ | ||[http://downloads.isee.biz/pub/releases/uboot/v2014.01-0-omap5/u-boot-2014.01-0-omap5.tar.gz 2014.01-0-omap5] ([http://downloads.isee.biz/pub/releases/uboot/v2014.01-0-omap5/u-boot-2014.01-0-omap5.tar.gz.md5 md5sum]) | ||
+ | ||[http://downloads.isee.biz/pub/releases/uboot/v2014.01-0-omap5/MLO-2014.01-0-omap5.bin MLO-2014.01-0-omap5.bin] ([http://downloads.isee.biz/pub/releases/uboot/v2014.01-0-omap5/SPL-2014.01-0-omap5.bin.md5 md5sum]) | ||
+ | ||[http://downloads.isee.biz/pub/releases/uboot/v2014.01-0-omap5/u-boot-2014.01-0-omap5.img u-boot-2014.01-0-omap5.img] ([http://downloads.isee.biz/pub/releases/uboot/v2014.01-0-omap5/u-boot-2014.01-0-omap5.img.md5 md5sum)] | ||
+ | |} | ||
− | + | =Build u-boot from sources= | |
+ | '''Download''' the latest stable version sources and follow next steps: | ||
− | + | wget http://downloads.isee.biz/pub/releases/uboot/v2014.01-0-omap5/u-boot-2014.01-0-omap5.tar.gz | |
− | + | tar xzf u-boot-2014.01-0-omap5.tar.gz | |
+ | cd [u-boot version] | ||
− | + | or from [http://git.isee.biz/ ISEE GIT Repository] | |
− | + | git clone git://git.isee.biz/pub/scm/u-boot-arm.git | |
+ | cd u-boot-arm/ | ||
+ | git checkout origin/u-boot-2014.01.y -b u-boot-2014.01.y.local | ||
− | + | Also, it could download from GIT Repositories ([http://git.isee.biz/ http://git.isee.biz/]) and test the last unstable version at your own risk (see "''U-Boot Mainline Series''" chapter in [[The bootloader U-Boot]])<br /> | |
+ | <br /> | ||
+ | '''Configure''' U-Boot for IGEPv5 device. | ||
− | + | make CROSS_COMPILE=[your cross compiler] omap5_igep0050_config | |
− | + | Then '''build''' the SPL and the u-boot image. The result will be an ''MLO'' file and an ''u-boot.img'' file in current directory. Execute: | |
− | + | make CROSS_COMPILE=[your cross compiler] | |
− | === | + | =Changelog= |
− | + | * [http://git.isee.biz/?p=pub/scm/u-boot-arm.git;a=commit;h=44efc5c2396dc80b426384ea5a19c27873c881f3 Release 2014.01-0-omap5] | |
+ | ** First release for 2014.01.y series | ||
− | + | [[Category:U-Boot]] | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− |
Revision as of 16:05, 8 March 2018
U-boot isee_v2017.03
Clone the u-boot repo
Clone the u-boot repository using git address:
$ git@git.isee.biz:arm-boot/u-boot-arm.git
or
$ https://git.isee.biz/arm-boot/u-boot-arm.git
Checkout u-boot repo
Go to the u-boot-arm directory and checkout the isee_v2017.03 as:
$ cd u-boot-arm
$ git checkout remotes/origin/isee_v2017.03 -b isee_v2017.03
Set the board configuration
Now build the u-boot, first set the configuration with:
IGEP COM AQUILA RB11 (256MB RAM)
$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- am335x_igep0033_defconfig
IGEP COM AQUILA RB30 (512MB RAM) (IGEP0033)
$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- am335x_igep0033_RB30_defconfig
IGEP COM PROTON OMAP3530 (IGEP0032)
$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- igep0032_defconfig
IGEP SMARC AM335x (IGEP0034)
$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- am335x_igep0034_defconfig
IGEP SMARC AM335x (IGEP0034) Lite
$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- am335x_igep0034_lite_defconfig
IGEP COM Module DM3730 (IGEP0030)
$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- igep0030_defconfig
IGEP COM Module DM3730 (IGEP0020)
$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- igep0020_defconfig
Build u-boot
You can build u-boot executing this command:
$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-
What next...
After build u-boot you can use it for boot the board, exist several options for boot, check the Hardware Reference Manual about the options available for your board.
- Boot from MicroSD Card.
- Boot from NAND flash or eMMC.
- Boot from USB.
- Boot from Network.
Contents
Introduction
This article is for specific 2014.01.y U-Boot branch serie.
It is interesting read The bootloader U-Boot article previously.
On this 2014.01.y version, supported IGEP Processor Boards are:
- IGEPv5 (IGEP0050)
Binaries: latest stable u-boot version is: 2014.01-0-omap5 (20140131)
Platform | Sources | SPL binary | U-Boot binaries |
---|---|---|---|
IGEP0050 | 2014.01-0-omap5 (md5sum) | MLO-2014.01-0-omap5.bin (md5sum) | u-boot-2014.01-0-omap5.img (md5sum) |
Build u-boot from sources
Download the latest stable version sources and follow next steps:
wget http://downloads.isee.biz/pub/releases/uboot/v2014.01-0-omap5/u-boot-2014.01-0-omap5.tar.gz tar xzf u-boot-2014.01-0-omap5.tar.gz cd [u-boot version]
or from ISEE GIT Repository
git clone git://git.isee.biz/pub/scm/u-boot-arm.git cd u-boot-arm/ git checkout origin/u-boot-2014.01.y -b u-boot-2014.01.y.local
Also, it could download from GIT Repositories (http://git.isee.biz/) and test the last unstable version at your own risk (see "U-Boot Mainline Series" chapter in The bootloader U-Boot)
Configure U-Boot for IGEPv5 device.
make CROSS_COMPILE=[your cross compiler] omap5_igep0050_config
Then build the SPL and the u-boot image. The result will be an MLO file and an u-boot.img file in current directory. Execute:
make CROSS_COMPILE=[your cross compiler]
Changelog
- Release 2014.01-0-omap5
- First release for 2014.01.y series