1,381
edits
Changes
From IGEP - ISEE Wiki
m
<code>$ git clone git@git.isee.biz:arm-boot/u-boot-fslc.git</code>* IGEPv5 (IGEP0050)
or===Binaries===latest stable u-boot version is: '''2014.01-0-omap5 (20140131)'''
<code>$ git clone https{| border="1"|-!|'''Platform'''!|'''Sources'''!|'''SPL binary'''!|'''U-Boot binaries'''|-|| IGEP0050 ||[http://gitdownloads.isee.biz/armpub/releases/uboot/v2014.01-0-omap5/u-boot-2014.01-0-omap5.tar.gz 2014.01-0-omap5] ([http://downloads.isee.biz/pub/releases/uboot/v2014.01-0-omap5/u-boot-fslc2014.01-0-omap5.tar.gz.md5 md5sum])||[http://downloads.isee.git<biz/code>pub/releases/uboot/v2014.01-0-omap5/MLO-2014.01-0-omap5.bin MLO-2014.01-0-omap5.bin] ([http://downloads.isee.biz/pub/releases/uboot/v2014.01-0-omap5/SPL-2014.01-0-omap5.bin.md5 md5sum])||[http://downloads.isee.biz/pub/releases/uboot/v2014.01-0-omap5/u-boot-2014.01-0-omap5.img u-boot-2014.01-0-omap5.img] ([http://downloads.isee.biz/pub/releases/uboot/v2014.01-0-omap5/u-boot-2014.01-0-omap5.img.md5 md5sum)]|}
<code>$ wget http://downloads.isee.biz/pub/releases/uboot/v2014.01-0-omap5/u-boot-2014.01-0-omap5.tar.gz tar xzf u-boot-2014.01-0-omap5.tar.gz cd [u-bootversion]Or you can clone the u-fscl</code>boot repository using git address:
===Set the board configuration===Now build the u-boot, first set the configuration with: IGEP0046 SMARC Quad: <code>$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- mx6q_igep0046_defconfig</code> IGEP0046 SMARC Dual liteor
IGEP0046 SMARC Solo====Checkout u-boot repo====Go to the u-boot-arm directory and checkout the isee_v2017.03 as:
<code>$ make ARCH=arm CROSS_COMPILE=arm==Build MLO and U-linuxboot====Then '''build''' the SPL and the u-gnueabihfboot image. The result will be an ''MLO'' file and an ''u-</code>boot.img'' file in current directory. Execute:
* [[Category:U-Boot from MicroSD Card.* Boot from NAND flash.* Boot from eMMC.* Boot from USB.* Boot from Network.]]
Mcaro moved page U-boot Texas Instruments Series to U-Boot Texas Instruments Series
* Boot from Network.
==OMAP5 U-Boot 2015boot 2014.0401.y [EOL]=====Clone the u-boot repo===Clone the u-boot repository using git addressOn this 2014.01.y version, supported IGEP Processor Boards are:
===Checkout Build u-boot repofrom sources===Go to ====Download the u-boot-fscl directory and checkout sources===='''Download''' the latest stable version 2015.04.y assources and follow next steps:
<code>$ git checkout remotes/origin/@git.isee-imx-patches-2015.04biz:arm-next -b isee-imxboot/u-patches-2015.04boot-nextarm.localgit</code>
<code>$ make ARCH=arm CROSS_COMPILE=https://git.isee.biz/arm-linuxboot/u-gnueabihfboot- mx6dl_igep0046_defconfigarm.git</code>
$ cd u-boot-arm<codebr />$ make ARCH=arm CROSS_COMPILE=armgit checkout origin/u-boot-2014.01.y -linuxb u-gnueabihfboot- mx6s_igep0046_defconfig</code>2014.01.y.local
===Build u=Configure U-bootBoot for IGEPv5 device.====You can build u make CROSS_COMPILE=arm-linux-gnueabihf-boot executing this command:omap5_igep0050_config
make CROSS_COMPILE===What next...===After build uarm-linux-gnueabihf-boot you can use it for boot the board, exist several options for boot, check the Hardware Reference Manual about the options available for your board.
