U-Boot 2013.07.y

From IGEP - ISEE Wiki

Jump to: navigation, search

Introduction

This article is for specific 2013.07.y U-Boot branch serie.
It is interesting read The bootloader U-Boot article previously.

On this 2013.07.y version, supported IGEP Processor Boards are:

  • IGEP COM AQUILA (IGEP0033)

The currently supported IGEP Expansion Boards are as follows:

  • IGEP AQUILA EXPANSION (BASE0033)

Binaries: latest stable u-boot version is: 2013.07-0 (20130725)

Platform Sources SPL binary U-Boot binaries
 IGEP0033  2013.07-0 (md5sum) MLO-2013.07-0.bin (md5sum) u-boot-2013.07-0.img (md5sum)

Build u-boot from sources

Download the latest stable version sources and follow next steps:

wget http://downloads.isee.biz/pub/releases/uboot/v2013.07-0/u-boot-2013.07-0.tar.gz
tar xzf u-boot-2013.07-0.tar.gz
cd [u-boot version]

or from ISEE GIT Repository

git clone git://git.isee.biz/pub/scm/u-boot-arm.git 
cd u-boot-arm/
git checkout origin/u-boot-2013.07.y -b u-boot-2013.07.y.local

Also, it could download from GIT Repositories (http://git.isee.biz/) and test the last unstable version at your own risk (see "U-Boot Mainline Series" chapter in The bootloader U-Boot)

Configure U-Boot for IGEP COM AQUILA device.

make CROSS_COMPILE=[your cross compiler] igep0033_config

Then build the SPL and the u-boot image. The result will be an MLO file and an u-boot.img file in current directory. Execute:

make CROSS_COMPILE=[your cross compiler]

Known issues

  • GCC 4.7 version should be used to compile U-Boot 2013.07.y.

Changelog