0
edits
Changes
From IGEP - ISEE Wiki
m
The result will be : mmc rescan 0* For IGEP v2 platform**x fatload mmc 0 0x80300000 u-load-ddpboot.bin.ift in autobuild/igep0020/flash directory (for OneNAND DDP)**x-load.bin.ift in autobuild/igep0020/sdcard directory (for SD card)*For OMAP3 IGEP module**x-load-ddp.bin.ift in autobuild/igep0030/flash directory (for OneNAND DDP) onenand erase 0x80000 0x180000**x-load.bin.ift in autobuild/igep0030/sdcard directory (for SD card) onenand write 0x80300000 0x80000 0x180000
→X-loader v1.4.4-3 (stable)
if you have updated your SDK environment to latest version (see [[Ubuntu 8.04 IGEP v2.0 SDK Virtual Machine]])
= X-loader v1.4.4-1 3 (stable) =
Download the IGEP X-loader sources and follow next steps:
{{Message/Broken Links}} $ wget http://downloads.igep.es/sources/x-loader-1.4.4-13.tar.gz $ tar xzf x-loader-1.4.4-13.tar.gz $ cd x-loader-1.4.4-13
$ scripts/./autobuild.sh arm-none-linux-gnueabi-
**x-load.bin.ift in autobuild/igep0030/sdcard directory (for SD card)
= X-loader mainline tree (development) =
<span style="color: rgb(255, 0, 0);">'''Note:''' The 'master' branch is where the development work takes place and you should use this if you're after to work with the latest cutting edge developments. It is possible trunk can suffer temporary periods of instability while new features are developed and if this is undesirable we recommend using one of the release branches. '''Use ONLY for development purposes.'''</span>
$ git clone git://git.igep.es/pub/scm/x-loader.git
$ cd x-loader
$ git checkout origin/for-next -b for-next
and build with
$ cd x-loader
$ scriptsmake CROSS_COMPILE=arm-none-linux-gnueabi- igep00x0_config $ make CROSS_COMPILE=arm-none-linux-gnueabi- The result will be :* x-load.bin.ift in ./directory = Quality assurance: Test Cases = == Status table == == Test case definitions == ''' #001 : SDCARD boot ''' How to test: Put x-loader to sdcard and check if booting. Result should be like : Texas Instruments X-Loader 1.5.0 (May 5 2011 - 09:59:19) Reading boot sector u-boot.bin not found or blank nand contents - attempting serial boot . . . ## Ready for binary (kermit) download to 0x80008000 at 115200 bps... ''' #002 : Load u-boot from SD-card ''' How to test: Put x-loader and u-boot to SD-card and check if booting. Result should be like : <pre> Texas Instruments X-Loader 1.5.0 (May 5 2011 - 09:59:19) Reading boot sector Loading u-boot.bin from mmc U-Boot 2011.03-00406-gf92edd8 (May 05 2011 - 13:01:04)</autobuildpre> ''' #003 : ONENAND boot ''' How to test: Put x-loader to onenand and check if booting. Result should be like : Texas Instruments X-Loader 1.5.0 (May 5 2011 - 09:59:19) u-boot.sh armbin not found or blank nand contents - attempting serial boot . . . ## Ready for binary (kermit) download to 0x80008000 at 115200 bps... Script : flash x-loader using u-boot mmc rescan 0 fatload mmc 0:1 0x80300000 mlo onenand erase 0 0x80000 onenand write 0x80300000 0 0x80000 ''' #004 : Load u-boot from onenand ''' How to test: Put x-loader and u-boot to SD-card and check if booting. Result should be like : <pre> Texas Instruments X-Loader 1.5.0 (May 19 2011 - 10:47:12) Detected Numonyx OneNAND 4G Flash Loading u-boot.bin from onenand U-Boot 2011.03-00532-noneg638a48e (May 19 2011 -linux11:43:43)</pre> Script : flash u-gnueabiboot using u-boot
= Changelog =
* [http://git.igep.es/?p=pub/scm/x-loader.git;a=commit;h=7a4eb1c5c2a6f2c83927c7a09a335481dc054d70 2011-07-29 Release 1.4.4-3]
** fix build with linaro toolchain
* [http://git.igep.es/?p=pub/scm/x-loader.git;a=commit;h=5a8ddfa826ee447853c27f14dc437dd81e2c52a5 2011-03-07 Release 1.4.4-2]
** improve clk frequency selection
* [http://git.igep.es/?p=pub/scm/x-loader.git;a=commit;h=0aad3f949c55196491721129d73261ac6bcca120 2010-11-08 Release 1.4.4-1]
** improve led management
** add support for OMAP3 IGEP module (igep0030)
[[Category:SoftwareBoot loaders|Xloader]]
