Latest revision as of 13:20, 14 May 2012

X-loader for IGEP platforms

First of all setup the build environment sourcing this script

$ source /usr/local/poky/eabi-glibc/arm/environment-setup

or

$ source /usr/local/poky/eabi-glibc/environment-setup-arm-none-linux-gnueabi

if you have updated your SDK environment to latest version (see Ubuntu 8.04 IGEP v2.0 SDK Virtual Machine)

X-loader v1.4.4-3 (stable)

Download the IGEP X-loader sources and follow next steps:

A user reported that this page might contain some broken, wrong or missing links to external pages. Thank you for your patience as it is being fixed.

$ wget http://downloads.igep.es/sources/x-loader-1.4.4-3.tar.gz
$ tar xzf x-loader-1.4.4-3.tar.gz
$ cd x-loader-1.4.4-3
$ scripts/./autobuild.sh arm-none-linux-gnueabi-

The result will be :

• For IGEP v2 platform
  • x-load-ddp.bin.ift in autobuild/igep0020/flash directory (for OneNAND DDP)
  • x-load.bin.ift in autobuild/igep0020/sdcard directory (for SD card)
• For OMAP3 IGEP module
  • x-load-ddp.bin.ift in autobuild/igep0030/flash directory (for OneNAND DDP)
  • x-load.bin.ift in autobuild/igep0030/sdcard directory (for SD card)

X-loader development

Note: The 'master' branch is where the development work takes place and you should use this if you're after to work with the latest cutting edge developments. It is possible trunk can suffer temporary periods of instability while new features are developed and if this is undesirable we recommend using one of the release branches. Use ONLY for development purposes.

Clone the GIT repository from git.igep.es

$ git clone git://git.igep.es/pub/scm/x-loader.git
$ cd x-loader
$ git checkout origin/for-next -b for-next

and build with

$ cd x-loader
$ make CROSS_COMPILE=arm-none-linux-gnueabi- igep00x0_config 
$ make CROSS_COMPILE=arm-none-linux-gnueabi-

The result will be :

• x-load.bin.ift in ./ directory

Quality assurance: Test Cases

Status table

Test case definitions

#001 : SDCARD boot

How to test: Put x-loader to sdcard and check if booting. Result should be like :

Texas Instruments X-Loader 1.5.0 (May  5 2011 - 09:59:19)
Reading boot sector
u-boot.bin not found or blank nand contents - attempting serial boot . . .
## Ready for binary (kermit) download to 0x80008000 at 115200 bps...

#002 : Load u-boot from SD-card

How to test: Put x-loader and u-boot to SD-card and check if booting. Result should be like :

 Texas Instruments X-Loader 1.5.0 (May  5 2011 - 09:59:19)
 Reading boot sector
 Loading u-boot.bin from mmc

 U-Boot 2011.03-00406-gf92edd8 (May 05 2011 - 13:01:04)

#003 : ONENAND boot

How to test: Put x-loader to onenand and check if booting. Result should be like :

Texas Instruments X-Loader 1.5.0 (May  5 2011 - 09:59:19)
u-boot.bin not found or blank nand contents - attempting serial boot . . .
## Ready for binary (kermit) download to 0x80008000 at 115200 bps...

Script : flash x-loader using u-boot

mmc rescan 0
fatload mmc 0:1 0x80300000 mlo
onenand erase 0 0x80000
onenand write 0x80300000 0 0x80000

#004 : Load u-boot from onenand

How to test: Put x-loader and u-boot to SD-card and check if booting. Result should be like :

 Texas Instruments X-Loader 1.5.0 (May 19 2011 - 10:47:12)
 Detected Numonyx OneNAND 4G Flash
 Loading u-boot.bin from onenand

 U-Boot 2011.03-00532-g638a48e (May 19 2011 - 11:43:43)

Script : flash u-boot using u-boot

mmc rescan 0
fatload mmc 0 0x80300000 u-boot.bin
onenand erase 0x80000 0x180000
onenand write 0x80300000 0x80000 0x180000

Changelog

• 2011-07-29 Release 1.4.4-3
  • fix build with linaro toolchain
• 2011-03-07 Release 1.4.4-2
  • improve clk frequency selection
• 2010-11-08 Release 1.4.4-1
  • improve led management
• 2010-10-12 Release 1.4.4-0
  • add support for DM3730
• 2010-06-15 Release 1.4.3-0
  • add watchdog support
  • add support for the 128MB SDRAM
  • add support for OMAP3 IGEP module (igep0030)