1,381
edits
Changes
From IGEP - ISEE Wiki
→How to cross compile the U-Boot
=How to cross compile the U-Boot=
In order to compile and build the U-Boot for IGEP PROCESSOR BOARDS you should set the CROSS_COMPILE variable. Set this to the prefix of your toolchain (including the trailing dash "-"). So if your toolchain is invoked as say arm-linux-gnueabi-gcc, just chop off that trailing gcc and that's what you use: arm-linux-gnugnueabihf-.
As example, once you've downloaded the u-boot source, you should follow these steps: