Template:Navigation/IGEP Technology Devices Guides/Next Step

From IGEP - ISEE Wiki

Revision as of 12:14, 26 July 2013 by Carles Recasens (talk | contribs)

Jump to: navigation, search


You have successfully completed this chapter of the guide.

Identify the different parts of the radar sensor ORION

It is very important you are able to identify the basic parts of the radar in order to avoid wrong set ups of measurement.

The next picture show which is the 24GHz transmitting antenna, the receiving antenna, the transmitter (TX) and the receiver (RX):

                                                                         ORION DETAILS TOPs.jpg

You can also take a look at the bottom face:


                                                                 ORION BOTTOM.png

JL1 gives you access to the VCO signal

JD1 is the modulation signal

JD2 is the synchronism (you can use this signal to visualise the others on an oscilloscope)

JF1 is the IF signal

JC2 is the expansion connector for IGEPv2

JC4 and JC3 are the expansion connectors for IGEP COM MODULE

JP1 is the power connector



Expansion connector JC1

Continue with this tutorial at: [[{{{Next_Step}}}]]

</div>