261
edits
Changes
→Install IGEP Firmware on bootable SD-card
{{Message/Information Message|titlewidth="97%" cellspacing="4" cellpadding="4" border="0" align="center"|- style=TITLE"height: 121.1px;"|messagestyle= "height: 121.1px;" bgcolor="#ffffff"|[[Image:Warning_icon.png|left|97x88px]] <span style="color: #000000;">'''You should install kernel modules into each rootfs you download, don't miss * miss [http://labs.isee.biz/index.php/Linux_Kernel_4.9.y Linux KernelTutorial] }.'''</span> |}==*!* General information about RootFS *!*==To log into each one of the RootFS and igep firmware presented below you use UBUNTU / DEBIAN * Username: root* Password: letmein YOCTO * Username: root* Password:
==Ubuntu==
Download latest firmware release from downloads server
* [http://downloads.isee.biz/pub/isee-releases/ubuntu/xenial_16.04_lts/ubuntu-xenial-armhf-igep-base-v0.01.tgz Ubuntu Xenial 16.04 LTS (isee-v0.01) ARM Hard Float]
<span class="skimlinks-unlinked">sudo tar -xvzf /home/user/Downloads/ubuntu-xenial-armhf-igep-base-v0.01.tgz -C /media/user/rootfs</span>
==Debian==
Download latest firmware release from downloads server
* [http://downloads.isee.biz/pub/relaunch/rootfs/debian/stretch/debian-stretch-armhf-igep-base-no-versionv0.01.tgz Debian Stretch ARM Hard Float]
====Instructions needed to decompress in the SD====
==Buildroot==
Download latest firmware release from downloads server
* [http://downloads.isee.biz/pub/relaunch/rootfs/buildroot/skeltal/igep-buildroot-skeltal-base-no-version.bz2 Buildroot ARM Hard Float]
<span class="skimlinks-unlinked">sudo tar -xjzf /home/user/Downloads/igep-buildroot-skeltal-base-no-version.bz2 -C /media/user/rootfs</span>
==Yocto==
===<u><span id="Introduction" class="mw-headline">Introduction</span></u>===
[http://downloads.isee.biz/denzil/rpm/ Software public repositories] (RPM-based)
* [indexigep-media-create: Create a new bootable SD cards or HD images.php/Using_Ethernet_to_communicate eth0] − 192.168.5.1* eth0igep-flash: Flash bootable images to the board's flash memory* create-android-image:0 − assigned via dhcp.Create an Android image tarball from Android build* [indexe-functions: Required by other igep tools to function properly.php/Using_IGEP_WLAN_to_communicate wlan0] − 192.168.6.1 (with dhcp server)* [index.php/Using_USB_ethernet_gadget_to_communicate usb0] − 192.168.7.1 (with dhcp server)writeloader: Used by igep-flash when flashing igep-firmware for IGEPv2, IGEP COM MODULE, and IGEP COM PROTON boards due to ECC compatibility in those board's NAND
The first thing you'll do is download the latest firwmare according to your igep model
<pre>./igep-media-create --cp-uenv -–mmc --image --machine </pre>
where:<br /> - is the SD-Card device of your computer.<br /> - is the file that contains bootloader, kernel and rootfs image.<br /> - is the IGEP Processor Board. Available options are:
* igep0020 '''igep0033''' - For IGEP v2 COM AQUILA Processor Board* igep0030 '''igep0034'''- For IGEP SMARC AM335x , <span style="color: #0000ff;">'''IGEPv2'''</span> , <span style="color: #0000ff;">'''IGEP COM MODULE Processor Board* igep0032 - For '''</span> and '''<span style="color: #0000ff;">IGEP COM PROTON </span>''' Processor BoardBoards* igep0033 '''igep0046''' - For IGEP COM AQUILA iMX6, iMX6UL Processor Board(S/DL/Q/UL/ULL) '''<span style="color: #ff0000;">* igep0046 ** It is important to use igep0034 machine even for IGEPv2 (igep0020) IGEP COM MODULE (igep0030) and IGEP COM PROTON (igep0032) for this specific tool due to backwards incompatibility. Until a new patch of igep-media-create is made. Remember for those boards to use -- For IGEP iMX6 Processor Boardmachine igep0034 as argument</span>'''
<br />For example, assuming the SD-card device takes '/dev/sdf' and you have an IGEPv2 board ('igep0020'), type
<pre>./igep-media-create --cp-uenv --mmc /dev/sdf --machine igep0034 --image igep0020 -yocto-image demopyro-imageminimal-satofirmware-igep00x0v1.0.tar.bz2</pre>
For example, assuming the SD-card device takes '/dev/sdb' and you have an IGEP COM MODULE ('igep0030'), type
<pre>./igep-media-create --cp-uenv --mmc /dev/sdb --machine igep0030 igep0034 --image demoigep0020-yocto-imagepyro-minimal-satofirmware-igep00x0v1.0.tar.bz2</pre>
These methods should give you a bootable SD-card.