*24GHz to 24,250GHz Specified [http://en.wikipedia.org/wiki/ISM_band 24GHz ISM Band])<br>
*+20dBm [http://en.wikipedia.org/wiki/Equivalent_isotropically_radiated_power E.I.R.P.]<br>
*Voltage Tuning Range: +1 to +6Volts<br> *+5V PowerSupply
*8Watt Consumption (Continuous Operation)
*IF Amplification: 55dB<br>
*2 Analog to Digital Converters 1 and 3 MSPS [Optional, only one operational]
*ADC Data Capture via SPI Link
*Basic Control Connector:<br>**Power +5V<br>**GND<br>**Vt ([http://en.wikipedia.org/wiki/Voltage-controlled_oscillator VCO] Tuning Voltage)<br>**IF Signal<br>**CTL1 control port to switch standard or Narrow Band Pass Filtering<br>**CTL2 control port to switch standard or Doppler filtering<br>**PULSE control signal for pulsed mode operation<br>*Expansion Connector for [http://labs.igep.es/index.php/IGEP_v2_platform IGEPv2] or BEAGLEBOARD:<br>
**Power +5V<br>
**GND<br>
**CTL control port for initial sweep and capture data<br>
**PULSE control signal for pulsed mode operation<br>
*Expansion Connectors for [http://labs.igep.es/index.php/IGEP_module IGEP MODULE] or GUMSTIX OVERO Board:<br>
**Power +4.2V<br>
**GND<br>
**DDS MODULATOR Programming through SPI Link<br>
**ADC Sampling and Data Capture through SPI Link<br>
**IF Signal<br>
**CTL1 control port to switch standard or Narrow Band Pass Filtering<br>
**CTL2 control port to switch standard or Doppler filtering<br>
**CTL control port for initial sweep and capture data<br>
**PULSE control signal for pulsed mode operation<br>
*USB-OTG Connector. Operational only when [http://labs.igep.es/index.php/IGEP_module IGEP MODULE] or GUMSTIX OVERO is used.<br>
*Power +5V Connector<br>
<br>
*Released on April June 2011.
<br>