Difference between revisions of "RADR0010 Features"

From IGEP - ISEE Wiki

Jump to: navigation, search
(Radar Kit v2)
Line 8: Line 8:
 
[[Image:foto.jpg|center|Radar v2]]<br>  
 
[[Image:foto.jpg|center|Radar v2]]<br>  
  
== Radar v2 Board Main Characteristics  ==
+
= Radar Kit v2 Main Characteristics  =
  
 
*[http://en.wikipedia.org/wiki/K_band K-Band] [http://en.wikipedia.org/wiki/Voltage-controlled_oscillator VCO] Radar Transceiver<br>  
 
*[http://en.wikipedia.org/wiki/K_band K-Band] [http://en.wikipedia.org/wiki/Voltage-controlled_oscillator VCO] Radar Transceiver<br>  
Line 26: Line 26:
 
<br>
 
<br>
  
== Radar v2 Board Features  ==
+
= Radar Kit v2 Board Features  =
  
=== Basic Option<br> ===
+
== Specifications ==
 
 
*23GHz to 24,5GHz Operational<br>
 
*24GHz to 24,250GHz Specified ([http://en.wikipedia.org/wiki/ISM_band 24GHz ISM Band])<br>
 
*+20dBm [http://en.wikipedia.org/wiki/Equivalent_isotropically_radiated_power E.I.R.P.]<br>
 
*Voltage Tuning Range: +1 to +6Volts<br>
 
*+5V Power<br>
 
*2,5W Consumption (Continuous Operation)<br>
 
*IF Pre-Amplification: 25dB<br>
 
*IF BandWidth limited 1-32KHz for noise reduction<br>
 
*Selectable 100Hz to 32KHz Filter for Doppler [http://en.wikipedia.org/wiki/Modulation CW] Measurements<br>
 
*[http://en.wikipedia.org/wiki/Modulation CW] / [http://en.wikipedia.org/wiki/Frequency-shift_keying FSK] / [http://en.wikipedia.org/wiki/FMCW FMCW] Modes<br>
 
*Single Basic Control Connector:<br>
 
**Power +5V<br>
 
**GND<br>
 
**Vt ([http://en.wikipedia.org/wiki/Voltage-controlled_oscillator VCO] Tuning Voltage)<br>
 
**IF Signal<br>
 
**5VCTL2 control port to switch standard or Doppler filtering<br>
 
**5VPULSE control signal for pulsed mode operation<br>
 
 
 
 
 
#ST - rr (Information Under NDA)<br>
 
 
 
*Released on April 2011.
 
 
 
<br>
 
 
 
=== Complete Option  ===
 
 
*23GHz to 24,5GHz Operational<br>
 
*23GHz to 24,5GHz Operational<br>
 
*24GHz to 24,250GHz Specified [http://en.wikipedia.org/wiki/ISM_band 24GHz ISM Band])<br>
 
*24GHz to 24,250GHz Specified [http://en.wikipedia.org/wiki/ISM_band 24GHz ISM Band])<br>

Revision as of 09:06, 3 March 2011

Radar Kit v2 Overview

Radar Kit v2 is a Complete K-Band Radar System Technology Demonstrator.
It is the result of combining Radar v2 Board Complete Option with IGEPv2 Board.

Designed for using World-Wide 24GHz ISM Band.



Radar Kit v2 Main Characteristics

  • K-Band VCO Radar Transceiver
  • CW / FSK / FMCW Modes
  • ISEE Propietary Microwave Hardware Design
  • 24GHz Low Noise Amplifier
  • IF Preamplifier
  • Bandwidth Limited for low noise performance
  • Integrated micro-strip antennas
  • Small Profile
  • Temperature Range: -40 to +80º C
  • Complete Option makes possible Processor Board connection (for Advanced Applications):

IGEPv2,IGEP MODULE, BEAGLEBOARD and GUMSTIX OVERO COMPATIBLE



Radar Kit v2 Board Features

Specifications

  • 23GHz to 24,5GHz Operational
  • 24GHz to 24,250GHz Specified 24GHz ISM Band)
  • +20dBm E.I.R.P.
  • Voltage Tuning Range: +1 to +6Volts
  • +5V Power
  • 8Watt Consumption (Continuous Operation)
  • IF Amplification: 55dB
  • IF Automatic Gain Control 40dB Dynamic Range
  • IF Standard BandWidth limited 1-32KHz for noise reduction
  • Selectable 100Hz to 32KHz IF Filter for Doppler CW Measurements
  • Selectable 4KHz to 25KHz IF Filter for Narrow Band Precise Measurements
  • CW / FSK / FMCW Modes
  • Direct Digital Synthesizer Modulator Programmable via SPI Link
  • 2 Analog to Digital Converters 1 and 3 MSPS [Optional, only one operational]
  • ADC Data Capture via SPI Link
  • Basic Control Connector:
    • Power +5V
    • GND
    • Vt (VCO Tuning Voltage)
    • IF Signal
    • CTL1 control port to switch standard or Narrow Band Pass Filtering
    • CTL2 control port to switch standard or Doppler filtering
    • PULSE control signal for pulsed mode operation
  • Expansion Connector for IGEPv2 or BEAGLEBOARD:
    • Power +5V
    • GND
    • DDS MODULATOR Programming through SPI Link
    • ADC Sampling and Data Capture through SPI Link
    • IF Signal
    • CTL1 control port to switch standard or Narrow Band Pass Filtering
    • CTL2 control port to switch standard or Doppler filtering
    • CTL control port for initial sweep and capture data
    • PULSE control signal for pulsed mode operation
  • Expansion Connectors for IGEP MODULE or GUMSTIX OVERO Board:
    • Power +4.2V
    • GND
    • DDS MODULATOR Programming through SPI Link
    • ADC Sampling and Data Capture through SPI Link
    • IF Signal
    • CTL1 control port to switch standard or Narrow Band Pass Filtering
    • CTL2 control port to switch standard or Doppler filtering
    • CTL control port for initial sweep and capture data
    • PULSE control signal for pulsed mode operation
  • USB-OTG Connector. Operational only when IGEP MODULE or GUMSTIX OVERO is used.
  • Power +5V Connector
  • EEPROM Programmable via I2C link
  • Optional Linear Regulator to extend Input Source Power to +16Volts


  • Released on April 2011.


USER MANUAL & TECHNICAL SPECIFICATION


USEFUL LINKS

RADAR NOTES
Radio Spectrum
RF Cafe
UWB
HFE Magazine
Microwaves & RF Magazine
History of Radar