|
|
| Line 1: |
Line 1: |
| − | = Radar v2 Board =
| + | #REDIRECT:[[:Category:IGEP Radar]] |
| − | | |
| − | Radar v2 BOARD is a Single Board [http://en.wikipedia.org/wiki/K_band K-Band] Radar Sensor Technology Demonstrator. Designed for using World-Wide [http://en.wikipedia.org/wiki/ISM_band 24GHz ISM Band].<br> This board '''can be connected to several processor boards''' for Control and Signal Processing.<br> Complete Option is compatible with IGEPv2 Board, IGEP MODULE, BEAGLEBOARD and GUMSTIX OVERO.<br>
| |
| − | | |
| − | [[Image:Radarv2.jpg|424x269px|Radar v2]]<br> | |
| − | | |
| − | = Radar v2 Board Main Specifications<br> =
| |
| − | | |
| − | *[http://en.wikipedia.org/wiki/K_band K-Band] [http://en.wikipedia.org/wiki/Voltage-controlled_oscillator VCO] Radar Transceiver<br>
| |
| − | *[http://en.wikipedia.org/wiki/Modulation CW] / [http://en.wikipedia.org/wiki/Frequency-shift_keying FSK] / [http://en.wikipedia.org/wiki/FMCW FMCW] Modes<br>
| |
| − | *ISEE Propietary Microwave Hardware Design<br>
| |
| − | *24GHz Low Noise Amplifier<br>
| |
| − | *IF Preamplifier<br>
| |
| − | *Bandwidth Limited for low noise performance<br>
| |
| − | *Integrated micro-strip antennas<br>
| |
| − | *Small Profile<br>
| |
| − | *Temperature Range: -40 to +80º C<br>
| |
| − | *Complete Option makes possible Processor Board connection (for Advanced Applications):
| |
| − | | |
| − | IGEPv2,IGEP MODULE, BEAGLEBOARD and GUMSTIX OVERO COMPATIBLE<br>
| |
| − | | |
| − | <br>
| |
| − | | |
| − | | |
| − | | |
| − | == Radar v2 Standalone Features<br> ==
| |
| − | | |
| − | *23GHz to 24,5GHz Operational<br>
| |
| − | *24GHz to 24,250GHz Specified ([http://en.wikipedia.org/wiki/ISM_band 24GHz ISM Band])<br>
| |
| − | *+20dBm [http://en.wikipedia.org/wiki/Equivalent_isotropically_radiated_power E.I.R.P.]<br>
| |
| − | *Voltage Tuning Range: +1 to +6Volts<br>
| |
| − | *+5V Power<br>
| |
| − | *2,5W Consumption (Continuous Operation)<br>
| |
| − | *IF Pre-Amplification: 25dB<br>
| |
| − | *IF BandWidth limited 1-32KHz for noise reduction<br>
| |
| − | *Selectable 100Hz to 32KHz Filter for Doppler [http://en.wikipedia.org/wiki/Modulation CW] Measurements<br>
| |
| − | *[http://en.wikipedia.org/wiki/Modulation CW] / [http://en.wikipedia.org/wiki/Frequency-shift_keying FSK] / [http://en.wikipedia.org/wiki/FMCW FMCW] Modes<br>
| |
| − | *Single Basic Control Connector:<br>
| |
| − | **Power +5V<br>
| |
| − | **GND<br>
| |
| − | **Vt ([http://en.wikipedia.org/wiki/Voltage-controlled_oscillator VCO] Tuning Voltage)<br>
| |
| − | **IF Signal<br>
| |
| − | **5VCTL2 control port to switch standard or Doppler filtering<br>
| |
| − | **5VPULSE control signal for pulsed mode operation<br>
| |
| − | | |
| − | <br>
| |
| − | | |
| − | *Released on April 2011.
| |
| − | | |
| − | <br>
| |
| − | | |
| − | == Radar Kit v2 Features ( Radar Kit v2 + IGEPv2 Board ) ==
| |
| − | | |
| − | [[Image:Radar_Kit_v2.jpg|416x278px]]
| |
| − | | |
| − | *[http://en.wikipedia.org/wiki/K_band K-Band] [http://en.wikipedia.org/wiki/Voltage-controlled_oscillator VCO] Radar Transceiver
| |
| − | *[http://en.wikipedia.org/wiki/Modulation CW] / [http://en.wikipedia.org/wiki/Frequency-shift_keying FSK] / [http://en.wikipedia.org/wiki/FMCW FMCW] Modes<br>
| |
| − | *ISEE Propietary Microwave Hardware Design<br>
| |
| − | *24GHz Low Noise Amplifier<br>
| |
| − | *IF Preamplifier<br>
| |
| − | *Bandwidth Limited for low noise performance<br>
| |
| − | *Integrated micro-strip antennas<br>
| |
| − | *Small Profile<br>
| |
| − | *Temperature Range: -40 to +80º C<br>
| |
| − | *IGEPv2 Processor Board for Advanced Applications<br>
| |
| − | *Ethernet Link<br>
| |
| − | *Web Server for Radar Control Configuration and Signal Monitorng in Pseudo-Real Time<br>
| |
| − | *Internet access to Radar: control and monitoring
| |
| − | *High Speed Processing Capabilities if [http://focus.ti.com/dsp/docs/dspcontent.tsp?contentId=53403 TI OMAP35x] DSP is used (FFT, Digital Filtering, etc)
| |
| − | | |
| − | | |
| − | | |
| − | === RADAR KIT: Radar v2 Board + IGEPv2 Board Complete Features<br> ===
| |
| − | | |
| − | *23GHz to 24,5GHz Operational<br>
| |
| − | *24GHz to 24,250GHz Specified [http://en.wikipedia.org/wiki/ISM_band 24GHz ISM Band])<br>
| |
| − | *+20dBm [http://en.wikipedia.org/wiki/Equivalent_isotropically_radiated_power E.I.R.P.]<br>
| |
| − | *Voltage Tuning Range: +1 to +6Volts<br>
| |
| − | *+5V Power
| |
| − | *3Watt Consumption (Continuous Operation)
| |
| − | *IF Amplification: 55dB<br>
| |
| − | *IF Automatic Gain Control 40dB Dynamic Range
| |
| − | *IF Standard BandWidth limited 1-32KHz for noise reduction<br>
| |
| − | *Selectable 100Hz to 32KHz IF Filter for Doppler [http://en.wikipedia.org/wiki/Modulation CW] Measurements<br>
| |
| − | *Selectable 4KHz to 25KHz IF Filter for Narrow Band Precise Measurements<br>
| |
| − | *[http://en.wikipedia.org/wiki/Modulation CW] / [http://en.wikipedia.org/wiki/Frequency-shift_keying FSK] / [http://en.wikipedia.org/wiki/FMCW FMCW] Modes<br>
| |
| − | *[http://en.wikipedia.org/wiki/Direct_digital_synthesizer Direct Digital Synthesizer ]Modulator Programmable via SPI Link
| |
| − | *2 Analog to Digital Converters 1 and 3 MSPS [Optional, only one operational]
| |
| − | *ADC Data Capture via SPI Link
| |
| − | *Basic Control Connector:<br>
| |
| − | **Power +5V<br>
| |
| − | **GND<br>
| |
| − | **Vt ([http://en.wikipedia.org/wiki/Voltage-controlled_oscillator VCO] Tuning Voltage)<br>
| |
| − | **IF Signal<br>
| |
| − | **CTL1 control port to switch standard or Narrow Band Pass Filtering<br>
| |
| − | **CTL2 control port to switch standard or Doppler filtering<br>
| |
| − | **PULSE control signal for pulsed mode operation<br>
| |
| − | *Expansion Connector for IGEPv2 or BEAGLEBOARD:<br>
| |
| − | **Power +5V<br>
| |
| − | **GND<br>
| |
| − | **DDS MODULATOR Programming through SPI Link<br>
| |
| − | **ADC Sampling and Data Capture through SPI Link<br>
| |
| − | **IF Signal<br>
| |
| − | **CTL1 control port to switch standard or Narrow Band Pass Filtering<br>
| |
| − | **CTL2 control port to switch standard or Doppler filtering<br>
| |
| − | **CTL control port for initial sweep and capture data<br>
| |
| − | **PULSE control signal for pulsed mode operation<br>
| |
| − | | |
| − | *Expansion Connectors for IGEP MODULE or GUMSTIX OVERO Board:<br>
| |
| − | **Power +4.2V<br>
| |
| − | **GND<br>
| |
| − | **DDS MODULATOR Programming through SPI Link<br>
| |
| − | **ADC Sampling and Data Capture through SPI Link<br>
| |
| − | **IF Signal<br>
| |
| − | **CTL1 control port to switch standard or Narrow Band Pass Filtering<br>
| |
| − | **CTL2 control port to switch standard or Doppler filtering<br>
| |
| − | **CTL control port for initial sweep and capture data<br>
| |
| − | **PULSE control signal for pulsed mode operation<br>
| |
| − | | |
| − | *USB-OTG Connector. Operational only when [http://labs.igep.es/index.php/IGEP_module IGEP MODULE] or GUMSTIX OVERO is used.<br>
| |
| − | | |
| − | *Power +5V Connector<br>
| |
| − | *EEPROM Programmable via I2C link
| |
| − | *Optional Linear Regulator to extend Input Source Power to +16Volts
| |
| − | | |
| − | <br>
| |
| − | | |
| − | *Released on April 2011.<br>
| |
| − | | |
| − | [[Category:RADR0010]] [Category:Features]]
| |
