|
|
(3 intermediate revisions by the same user not shown) |
Line 1: |
Line 1: |
− | = Radar v2 Board =
| + | #REDIRECT:[[:Category:IGEP Radar]] |
− | [http://www.igep-platform.com/index.php?option=com_content&view=article&id=91&Itemid=95 Radar v2 BOARD] is a Single Board [http://en.wikipedia.org/wiki/K_band K-Band] Radar Sensor Technology Demonstrator. <br>
| |
− | Designed for using World-Wide [http://en.wikipedia.org/wiki/ISM_band 24GHz ISM Band].<br>
| |
− | Complete Option can be connected to several processor Boards for Control and Signal Processing.<br>
| |
− | Complete Option is [http://labs.igep.es/index.php/IGEP_v2_platform IGEPv2],[http://labs.igep.es/index.php/IGEP_module IGEP MODULE], BEAGLEBOARD and GUMSTIX OVERO COMPATIBLE.<br>
| |
− | | |
− | [[Image:Radarv2.jpg|center|Radar v2]]<br>
| |
− | | |
− | == Radar v2 Board Main Characteristics ==
| |
− | | |
− | *[http://en.wikipedia.org/wiki/K_band K-Band] [http://en.wikipedia.org/wiki/Voltage-controlled_oscillator VCO] Radar Transceiver<br>
| |
− | *[http://en.wikipedia.org/wiki/Modulation CW] / [http://en.wikipedia.org/wiki/Frequency-shift_keying FSK] / [http://en.wikipedia.org/wiki/FMCW FMCW] Modes<br>
| |
− | *ISEE Propietary Microwave Hardware Design<br>
| |
− | *24GHz Low Noise Amplifier<br>
| |
− | *IF Preamplifier<br>
| |
− | *Bandwidth Limited for low noise performance<br>
| |
− | *Integrated micro-strip antennas<br>
| |
− | *Small Profile<br>
| |
− | *Temperature Range: -40 to +80º C<br>
| |
− | *Complete Option makes possible Processor Board connection (for Advanced Applications):
| |
− | [http://labs.igep.es/index.php/IGEP_v2_platform IGEPv2],[http://labs.igep.es/index.php/IGEP_module IGEP MODULE], BEAGLEBOARD and GUMSTIX OVERO COMPATIBLE<br> | |
− | | |
− | | |
− | | |
− | <br>
| |
− | | |
− | == Radar v2 Board Features ==
| |
− | | |
− | === Basic Option<br> ===
| |
− | | |
− | *23GHz to 24,5GHz Operational<br>
| |
− | *24GHz to 24,250GHz Specified ([http://en.wikipedia.org/wiki/ISM_band 24GHz ISM Band])<br>
| |
− | *+20dBm [http://en.wikipedia.org/wiki/Equivalent_isotropically_radiated_power E.I.R.P.]<br>
| |
− | *Voltage Tuning Range: +1 to +6Volts<br>
| |
− | *+5V Power<br>
| |
− | *2,5W Consumption (Continuous Operation)<br>
| |
− | *IF Pre-Amplification: 25dB<br>
| |
− | *IF BandWidth limited 1-32KHz for noise reduction<br>
| |
− | *Selectable 100Hz to 32KHz Filter for Doppler [http://en.wikipedia.org/wiki/Modulation CW] Measurements<br>
| |
− | *[http://en.wikipedia.org/wiki/Modulation CW] / [http://en.wikipedia.org/wiki/Frequency-shift_keying FSK] / [http://en.wikipedia.org/wiki/FMCW FMCW] Modes<br>
| |
− | *Single Basic Control Connector:<br>
| |
− | **Power +5V<br>
| |
− | **GND<br>
| |
− | **Vt ([http://en.wikipedia.org/wiki/Voltage-controlled_oscillator VCO] Tuning Voltage)<br>
| |
− | **IF Signal<br>
| |
− | **5VCTL2 control port to switch standard or Doppler filtering<br>
| |
− | **5VPULSE control signal for pulsed mode operation<br>
| |
− | | |
− | | |
− | *Released on April 2011.
| |
− | | |
− | <br>
| |
− | | |
− | === Complete Option ===
| |
− | | |
− | *23GHz to 24,5GHz Operational<br>
| |
− | *24GHz to 24,250GHz Specified [http://en.wikipedia.org/wiki/ISM_band 24GHz ISM Band])<br>
| |
− | *+20dBm [http://en.wikipedia.org/wiki/Equivalent_isotropically_radiated_power E.I.R.P.]<br>
| |
− | *Voltage Tuning Range: +1 to +6Volts<br>
| |
− | *+5V Power
| |
− | *3Watt Consumption (Continuous Operation)
| |
− | *IF Amplification: 55dB<br>
| |
− | *IF Automatic Gain Control 40dB Dynamic Range
| |
− | *IF Standard BandWidth limited 1-32KHz for noise reduction<br>
| |
− | *Selectable 100Hz to 32KHz IF Filter for Doppler [http://en.wikipedia.org/wiki/Modulation CW] Measurements<br>
| |
− | *Selectable 4KHz to 25KHz IF Filter for Narrow Band Precise Measurements<br>
| |
− | *[http://en.wikipedia.org/wiki/Modulation CW] / [http://en.wikipedia.org/wiki/Frequency-shift_keying FSK] / [http://en.wikipedia.org/wiki/FMCW FMCW] Modes<br>
| |
− | *[http://en.wikipedia.org/wiki/Direct_digital_synthesizer Direct Digital Synthesizer ]Modulator Programmable via SPI Link
| |
− | *2 Analog to Digital Converters 1 and 3 MSPS [Optional, only one operational]
| |
− | *ADC Data Capture via SPI Link
| |
− | *Basic Control Connector:<br>
| |
− | **Power +5V<br>
| |
− | **GND<br>
| |
− | **Vt ([http://en.wikipedia.org/wiki/Voltage-controlled_oscillator VCO] Tuning Voltage)<br>
| |
− | **IF Signal<br>
| |
− | **CTL1 control port to switch standard or Narrow Band Pass Filtering<br>
| |
− | **CTL2 control port to switch standard or Doppler filtering<br>
| |
− | **PULSE control signal for pulsed mode operation<br>
| |
− | *Expansion Connector for [http://labs.igep.es/index.php/IGEP_v2_platform IGEPv2] or BEAGLEBOARD:<br>
| |
− | **Power +5V<br>
| |
− | **GND<br>
| |
− | **DDS MODULATOR Programming through SPI Link<br>
| |
− | **ADC Sampling and Data Capture through SPI Link<br>
| |
− | **IF Signal<br>
| |
− | **CTL1 control port to switch standard or Narrow Band Pass Filtering<br>
| |
− | **CTL2 control port to switch standard or Doppler filtering<br>
| |
− | **CTL control port for initial sweep and capture data<br>
| |
− | **PULSE control signal for pulsed mode operation<br>
| |
− | | |
− | *Expansion Connectors for [http://labs.igep.es/index.php/IGEP_module IGEP MODULE] or GUMSTIX OVERO Board:<br>
| |
− | **Power +4.2V<br>
| |
− | **GND<br>
| |
− | **DDS MODULATOR Programming through SPI Link<br>
| |
− | **ADC Sampling and Data Capture through SPI Link<br>
| |
− | **IF Signal<br>
| |
− | **CTL1 control port to switch standard or Narrow Band Pass Filtering<br>
| |
− | **CTL2 control port to switch standard or Doppler filtering<br>
| |
− | **CTL control port for initial sweep and capture data<br>
| |
− | **PULSE control signal for pulsed mode operation<br>
| |
− | | |
− | *USB-OTG Connector. Operational only when [http://labs.igep.es/index.php/IGEP_module IGEP MODULE] or GUMSTIX OVERO is used.<br>
| |
− | | |
− | *Power +5V Connector<br>
| |
− | *EEPROM Programmable via I2C link
| |
− | *Optional Linear Regulator to extend Input Source Power to +16Volts
| |
− | | |
− | <br>
| |
− | | |
− | *Released on April 2011.
| |
− | | |
− | <br>
| |
− | | |
− | = USER MANUAL & TECHNICAL SPECIFICATION =
| |
− | | |
− | *[http://www.igep.es/public_docs/RADAR/MAN-PR-RADR.0010-022.01.HW_Radar_v2.pdf Radar v2 Manual & Technical Specification]
| |
− | <br>
| |
− | | |
− | = USEFUL LINKS =
| |
− | [http://en.wikipedia.org/wiki/RADAR RADAR NOTES]<br>
| |
− | [http://en.wikipedia.org/wiki/Radio_spectrum Radio Spectrum]<br>
| |
− | [http://www.rfcafe.com/ RF Cafe]<br>
| |
− | [http://en.wikipedia.org/wiki/Ultra-wideband UWB]<br>
| |
− | [http://www.highfrequencyelectronics.com/ HFE Magazine]<br>
| |
− | [http://www.mwrf.com/ Microwaves & RF Magazine]<br>
| |
− | [http://math.la.asu.edu/~kuang/LM/030902-Radar_History10.pdf History of Radar]<br>
| |
− | | |
− | | |
− | | |
− | = Radar Kit v2 Overview =
| |
− | | |
− | Radar Kit v2 is a Complete [http://en.wikipedia.org/wiki/K_band K-Band] Radar System Technology Demonstrator. <br> It is the result of combining [http://labs.igep.es/index.php/Radar_v2 Radar v2] Board Complete Option with [http://labs.igep.es/index.php/IGEP_v2_platform IGEPv2] Board.<br>
| |
− | | |
− | Designed for using World-Wide [http://en.wikipedia.org/wiki/ISM_band 24GHz ISM Band].<br>
| |
− | [[Image:Radar Kit v2.jpg|center]]<br>
| |
− | | |
− | <br> <br>
| |
− | | |
− | = Radar Kit v2 Main Characteristics =
| |
− | | |
− | *[http://en.wikipedia.org/wiki/K_band K-Band] [http://en.wikipedia.org/wiki/Voltage-controlled_oscillator VCO] Radar Transceiver<br>
| |
− | *[http://en.wikipedia.org/wiki/Modulation CW] / [http://en.wikipedia.org/wiki/Frequency-shift_keying FSK] / [http://en.wikipedia.org/wiki/FMCW FMCW] Modes<br>
| |
− | *ISEE Propietary Microwave Hardware Design<br>
| |
− | *24GHz Low Noise Amplifier<br>
| |
− | *IF Preamplifier<br>
| |
− | *Bandwidth Limited for low noise performance<br>
| |
− | *Integrated micro-strip antennas<br>
| |
− | *Small Profile<br>
| |
− | *Temperature Range: -40 to +80º C<br>
| |
− | *[http://labs.igep.es/index.php/IGEP_v2_platform IGEPv2] Processor Board for Advanced Applications<br>
| |
− | *Ethernet Link<br>
| |
− | *Web Server for Radar Control Configuration and Signal Monitorng in Pseudo-Real Time<br>
| |
− | *Internet access to Radar: control and monitoring
| |
− | *High Speed Processing Capabilities if [http://focus.ti.com/dsp/docs/dspcontent.tsp?contentId=53403 TI OMAP35x] DSP is used (FFT, Digital Filtering, etc)
| |
− | | |
− | <br>
| |
− | | |
− | <br>
| |
− | | |
− | <br>
| |
− | | |
− | = Radar Kit v2 Features =
| |
− | | |
− | == Specifications ==
| |
− | | |
− | *23GHz to 24,5GHz Operational<br>
| |
− | *24GHz to 24,250GHz Specified [http://en.wikipedia.org/wiki/ISM_band 24GHz ISM Band])<br>
| |
− | *+20dBm [http://en.wikipedia.org/wiki/Equivalent_isotropically_radiated_power E.I.R.P.]<br>
| |
− | *+5V Power Supply
| |
− | *8Watt Consumption (Continuous Operation)
| |
− | *IF Amplification: 55dB<br>
| |
− | *IF Automatic Gain Control 40dB Dynamic Range
| |
− | *IF Standard BandWidth limited 1-32KHz for noise reduction<br>
| |
− | *Selectable 100Hz to 32KHz IF Filter for Doppler [http://en.wikipedia.org/wiki/Modulation CW] Measurements<br>
| |
− | *Selectable 4KHz to 25KHz IF Filter for Narrow Band Precise Measurements<br>
| |
− | *[http://en.wikipedia.org/wiki/Modulation CW] / [http://en.wikipedia.org/wiki/Frequency-shift_keying FSK] / [http://en.wikipedia.org/wiki/FMCW FMCW] Modes<br>
| |
− | *Direct Digital Synthesizer Modulator Programmable via SPI Link
| |
− | *2 Analog to Digital Converters 1 and 3 MSPS [Optional on demand, only one operational]
| |
− | *ADC Data Capture via SPI Link
| |
− | | |
− | *Expansion Connector for [http://labs.igep.es/index.php/IGEP_v2_platform IGEPv2]:<br>
| |
− | **Power +5V<br>
| |
− | **GND<br>
| |
− | **DDS MODULATOR Programming through SPI Link<br>
| |
− | **ADC Sampling and Data Capture through SPI Link<br>
| |
− | **IF Signal<br>
| |
− | **CTL1 control port to switch standard or Narrow Band Pass Filtering<br>
| |
− | **CTL2 control port to switch standard or Doppler filtering<br>
| |
− | **CTL control port for initial sweep and capture data<br>
| |
− | **PULSE control signal for pulsed mode operation (on demand)<br>
| |
− | | |
− | *Power +5V Connector<br>
| |
− | *EEPROM Programmable via I2C link
| |
− | *Optional Linear Regulator to extend Input Source Power to +16Volts (on demand)
| |
− | | |
− | <br>
| |
− | | |
− | *Released on June 2011.
| |
− | | |
− | <br>
| |
− | | |
− | = USER MANUAL & TECHNICAL SPECIFICATION =
| |
− | | |
− | *[http://www.igep.es/public_docs/RADAR/MAN-PR-RADR.0010-023.01.HW_RadarKit_v2.pdf Radar Kit v2 Manual and Technical Specification]
| |
− | <br>
| |
− | | |
− | = USEFUL LINKS =
| |
− | [http://en.wikipedia.org/wiki/RADAR RADAR NOTES]<br>
| |
− | [http://en.wikipedia.org/wiki/Radio_spectrum Radio Spectrum]<br>
| |
− | [http://www.rfcafe.com/ RF Cafe]<br>
| |
− | [http://en.wikipedia.org/wiki/Ultra-wideband UWB]<br>
| |
− | [http://www.highfrequencyelectronics.com/ HFE Magazine]<br>
| |
− | [http://www.mwrf.com/ Microwaves & RF Magazine]<br>
| |
− | [http://math.la.asu.edu/~kuang/LM/030902-Radar_History10.pdf History of Radar]<br>
| |
− | | |
− | [[Category:IGEP Radar]] [[Category:RADR0010]] [[Category:Features]]
| |