Difference between revisions of "RADR0010 Features"
From IGEP - ISEE Wiki
Line 34: | Line 34: | ||
== Specifications == | == Specifications == | ||
− | *23GHz to 24,5GHz Operational<br> | + | |
− | *24GHz to 24,250GHz Specified [http://en.wikipedia.org/wiki/ISM_band 24GHz ISM Band])<br> | + | *23GHz to 24,5GHz Operational<br> |
+ | *24GHz to 24,250GHz Specified [http://en.wikipedia.org/wiki/ISM_band 24GHz ISM Band])<br> | ||
*+20dBm [http://en.wikipedia.org/wiki/Equivalent_isotropically_radiated_power E.I.R.P.]<br> | *+20dBm [http://en.wikipedia.org/wiki/Equivalent_isotropically_radiated_power E.I.R.P.]<br> | ||
− | *+5V Power Supply | + | *+5V Power Supply |
− | *8Watt Consumption (Continuous Operation) | + | *8Watt Consumption (Continuous Operation) |
*IF Amplification: 55dB<br> | *IF Amplification: 55dB<br> | ||
− | *IF Automatic Gain Control 40dB Dynamic Range | + | *IF Automatic Gain Control 40dB Dynamic Range |
*IF Standard BandWidth limited 1-32KHz for noise reduction<br> | *IF Standard BandWidth limited 1-32KHz for noise reduction<br> | ||
− | *Selectable 100Hz to 32KHz IF Filter for Doppler [http://en.wikipedia.org/wiki/Modulation CW] Measurements<br> | + | *Selectable 100Hz to 32KHz IF Filter for Doppler [http://en.wikipedia.org/wiki/Modulation CW] Measurements<br> |
*Selectable 4KHz to 25KHz IF Filter for Narrow Band Precise Measurements<br> | *Selectable 4KHz to 25KHz IF Filter for Narrow Band Precise Measurements<br> | ||
*[http://en.wikipedia.org/wiki/Modulation CW] / [http://en.wikipedia.org/wiki/Frequency-shift_keying FSK] / [http://en.wikipedia.org/wiki/FMCW FMCW] Modes<br> | *[http://en.wikipedia.org/wiki/Modulation CW] / [http://en.wikipedia.org/wiki/Frequency-shift_keying FSK] / [http://en.wikipedia.org/wiki/FMCW FMCW] Modes<br> | ||
− | *Direct Digital Synthesizer Modulator Programmable via SPI Link | + | *Direct Digital Synthesizer Modulator Programmable via SPI Link |
− | *2 Analog to Digital Converters 1 and 3 MSPS [Optional, only one operational] | + | *2 Analog to Digital Converters 1 and 3 MSPS [Optional on demand, only one operational] |
*ADC Data Capture via SPI Link | *ADC Data Capture via SPI Link | ||
− | *Expansion Connector for [http://labs.igep.es/index.php/IGEP_v2_platform IGEPv2]:<br> | + | *Expansion Connector for [http://labs.igep.es/index.php/IGEP_v2_platform IGEPv2]:<br> |
− | **Power +5V<br> | + | **Power +5V<br> |
− | **GND<br> | + | **GND<br> |
− | **DDS MODULATOR Programming through SPI Link<br> | + | **DDS MODULATOR Programming through SPI Link<br> |
− | **ADC Sampling and Data Capture through SPI Link<br> | + | **ADC Sampling and Data Capture through SPI Link<br> |
− | **IF Signal<br> | + | **IF Signal<br> |
− | **CTL1 control port to switch standard or Narrow Band Pass Filtering<br> | + | **CTL1 control port to switch standard or Narrow Band Pass Filtering<br> |
− | **CTL2 control port to switch standard or Doppler filtering<br> | + | **CTL2 control port to switch standard or Doppler filtering<br> |
− | **CTL control port for initial sweep and capture data<br> | + | **CTL control port for initial sweep and capture data<br> |
− | **PULSE control signal for pulsed mode operation<br> | + | **PULSE control signal for pulsed mode operation (on demand)<br> |
− | *Power +5V Connector<br> | + | *Power +5V Connector<br> |
− | *EEPROM Programmable via I2C link | + | *EEPROM Programmable via I2C link |
− | *Optional Linear Regulator to extend Input Source Power to +16Volts | + | *Optional Linear Regulator to extend Input Source Power to +16Volts (on demand) |
<br> | <br> |
Revision as of 12:30, 8 July 2011
Contents
Radar Kit v2 Overview
Radar Kit v2 is a Complete K-Band Radar System Technology Demonstrator.
It is the result of combining Radar v2 Board Complete Option with IGEPv2 Board.
Designed for using World-Wide 24GHz ISM Band.
Radar Kit v2 Main Characteristics
- K-Band VCO Radar Transceiver
- CW / FSK / FMCW Modes
- ISEE Propietary Microwave Hardware Design
- 24GHz Low Noise Amplifier
- IF Preamplifier
- Bandwidth Limited for low noise performance
- Integrated micro-strip antennas
- Small Profile
- Temperature Range: -40 to +80º C
- IGEPv2 Processor Board for Advanced Applications
- Ethernet Link
- Web Server for Radar Control Configuration and Signal Monitorng in Pseudo-Real Time
- Internet access to Radar: control and monitoring
- High Speed Processing Capabilities if TI OMAP35x DSP is used (FFT, Digital Filtering, etc)
Radar Kit v2 Features
Specifications
- 23GHz to 24,5GHz Operational
- 24GHz to 24,250GHz Specified 24GHz ISM Band)
- +20dBm E.I.R.P.
- +5V Power Supply
- 8Watt Consumption (Continuous Operation)
- IF Amplification: 55dB
- IF Automatic Gain Control 40dB Dynamic Range
- IF Standard BandWidth limited 1-32KHz for noise reduction
- Selectable 100Hz to 32KHz IF Filter for Doppler CW Measurements
- Selectable 4KHz to 25KHz IF Filter for Narrow Band Precise Measurements
- CW / FSK / FMCW Modes
- Direct Digital Synthesizer Modulator Programmable via SPI Link
- 2 Analog to Digital Converters 1 and 3 MSPS [Optional on demand, only one operational]
- ADC Data Capture via SPI Link
- Expansion Connector for IGEPv2:
- Power +5V
- GND
- DDS MODULATOR Programming through SPI Link
- ADC Sampling and Data Capture through SPI Link
- IF Signal
- CTL1 control port to switch standard or Narrow Band Pass Filtering
- CTL2 control port to switch standard or Doppler filtering
- CTL control port for initial sweep and capture data
- PULSE control signal for pulsed mode operation (on demand)
- Power +5V
- Power +5V Connector
- EEPROM Programmable via I2C link
- Optional Linear Regulator to extend Input Source Power to +16Volts (on demand)
- Released on June 2011.
USER MANUAL & TECHNICAL SPECIFICATION
USEFUL LINKS
RADAR NOTES
Radio Spectrum
RF Cafe
UWB
HFE Magazine
Microwaves & RF Magazine
History of Radar