Changes

In order to build your own igep firmware, you need to download the sources of the software you want to build and then compile them. Generally you want to start downloading and compiling u-boot, later you will download and compile kernel and finally you will download a rootfs and install the kernel modules you've already compiled into the rootfs. Finally you need to put in proper way all this software to an SD and boot your igep !

If you  don't feel in the mood to complete all those tutorials you are lucky because using igep precompiled software  can still boot your igep board !

# Get precompiled software from your igep board main page

# [http://labs.isee.biz/index.php/How_to_prepare_a_bootable_MicroSD_Card How to prepare a bootable MicroSD Card]