Pre-installed software on IGEP Processor Boards

From IGEP - ISEE Wiki

Revision as of 15:32, 13 August 2012 by Pau (talk | contribs) (Undo revision 6535 by Pau pajuelo (Talk))

Jump to: navigation, search

Overview

If you have a brand new IGEP Processor Board you must know that it comes with a firmware provided and installed on it by ISEE.


By default, if you power up your board it will run the software on the flash. But you can prepare a MicroSD card and boot from it by inserting it to the MicroSD card reader of your IGEP Processor Board, as it has more priority than the flash.


The pre-installed software consists of a minimal Linux-based distribution with a lite X Window System and GNOME Mobile based applications created with Yocto Platform Builder.


About the pre-installed software

The pre-installed software consists of:

  • IGEP X-loader: a bootloader compatible with all IGEP Processor Boards.
  • IGEP Kernel: a Linux Kernel maintained by ISEE.
  • IGEP firmware Yocto: the software distribution consists of a lite X Window System and GNOME Mobile based applications created with Yocto tools

For more information about these specific sotware, read the following articles:

Update the software image

Firmware update

You can update the pre-installed software of your IGEP Processor Board to a current release:


Create a customized MicroSD

You can also create a customized MicroSD with specific software distributions: